Tidewater Seaplane EP RTF 41.5"

Make the Tidewater your first — or next — float plane! Fast to assemble without using glue, it boosts your confidence with predictable flight characteristics and easy water handling. Takeoffs are a snap, whether from water, grass or by hand. At full throttle, the Tidewater is fast and powerful. When it’s time to land, just point the plane into the wind, reduce speed and keep the wings level…it almost lands itself!

• Construction: AeroCell foam
• Wing: One-piece with motor and pod, wing attaches to fuselage with 1/4-20x2 nylon wing bolt
• Aileron Control: Dual servo
• Motor: 28-30-1300 kV brushless outrunner
• Radio: Tactic 2.4GHz TTX404 4-channel transmitter with TR624 6-channel receiver
• Electronic Speed Control: 30A
• Servos: Four micro (2-aileron, 1-rudder, 1-elevator)
• Battery: ElectriFly 3S 11.1V 2200mAh 30C with Star Plug
• Battery Charger: Great Planes AC/DC 3S balancing LiPo Smart Charger
• Propeller: 9x4.5 ElectriFly PowerFlow Slo-Flyer, plastic construction
• Spinner: 2" (51mm) gray plastic
• Landing Gear: Two tip floats on either side of wing

• Wingspan: 41.5 in (1055mm)
• Length: 36 in (915mm)
• Weight: 32 oz (905g)
• Center of Gravity: Forward CG, 1-3/4" (44mm) Recommended CG, 1-7/8" (48mm) Aft CG, 2" (51mm) All measurements are from the leading edge of the wing at the fuselage side
• Control Throws: Low Rate High Rate
• Elevator: 1/4" (6mm) 12° 7/16" (11mm) 15°
• Rudder: 1/2" (13mm) 14° 7/8" (22mm) 24°
• Ailerons: 1/4" (6mm) 11° 1/2" (13mm) 23°