In The Box
- (1) River Jet Boat
- (1) Radio System
- (1) User Manual
Needed to Complete
- (1) 3S LiPo Battery with EC3™ or IC3™ connector
- (1) Compatible Battery Charger
- (4) AA Batteries for Transmitter
- Efficiently designed jet pump
- Self-Righting Hull
- High Impact Blow Molded ABS Hull
- Locking High Impact canopy
- Durable composite impeller
- Solid drive shaft with liner
- Dynamite® 90 AMP ESC 2-4S Compatible
- Powerful out-runner motor
- Auminum/water cooled motor mount
- Stainless steel hardware
- 2.4GHz radio system
- Styrofoam flotation
- Foam canopy seal
- Boat stand
- Trim adjustment servo option
There's nothing like riding in a full-scale jet boat, from jumping waves to darting across the lake. Jet boats can change direction in a heartbeat, providing thrill ride after thrill ride. The 23-inch RTR Deep-V River Jet Boat lets you cruise anywhere-including through rapids and moving water. The jet boat doesn't have an exposed propeller, turn fins or rudder. And with its powerful propulsion system, this boat can run in minimal amounts of water-even just a few inches. Thanks to its self-righting feature, the boat flips back over in a matter of seconds by activating the throttle. So whether you're new to RC boating or an experienced captain, you're sure to have a blast jumping rapids and running upstream.
The efficiently designed jet pump provides maximum propulsion and expert handling.
Thanks to the boat's self-righting feature, it flips back over in a matter of seconds by activating the throttle. Now you can drive in moving water without the fear of losing your boat.
The high-impact, blow-molded hull lets you bounce off rocks without worrying about cracking the hull.
The included Spektrum™ STX2™ 2.4GHz FHSS transmitter provides a clear, precise connection while the boat is on the water.
Locking high-impact canopy
Made of the same material as the hull, the canopy is attached by four thumb screws. High dense foam between the hull and canopy keeps water out of the hull and ensures your electronics stay dry.
Trim adjustment servo option
Note: This option is not available with the included radio system. Trim adjustment requires a 3-channel radio and receiver and a 1/18-scale or 1/16 scale size servo with stainless steel 3mm mounting screws (we do not carry the stainless steel 3mm mounting screws separately).
|Approximate Assembly Time||Less than 1 Hour|
|Beam||8 in (203mm)|
|Drive System||Jet Drive|
|Hull Height||6.5 in (165.1mm)|
|Motor Size||2300Kv 14-Pole Brushless Outrunner Motor, 33mmx42mm|
|Product Length||23 in (584mm)|
|Product Weight||3.15 lbs (1400g)|