Discontinued
Brand Logo
5 out of 5 Customer Rating

1/8 Inferno Neo3.0 VE 4X4 Off-Road 4S Brushless Buggy RTR, Green

Item No. KYO34108T1
Discontinued
Brand Logo
5 out of 5 Customer Rating

1/8 Inferno Neo3.0 VE 4X4 Off-Road 4S Brushless Buggy RTR, Green

Item No. KYO34108T1
This Item is No Longer Available
Selected Store

Product Details

Power and acceleration tests the bounds of common sense in a buggy that also features nimble control!
Key Features
  • Pre-Assembled Chassis And Body
  • Full-Time 4WD With Low CG
  • Big Bore Oil Shocks
  • Full Bearing Specifications
  • Wide Variety Of Optional Parts
icon-box
In The Box
  • (1) 1/8 Inferno Neo3.0 VE 4WD Buggy RTR
  • (1) 2.4GHz Syncro KT-231P+ Transmitter
  • (4) L Shaped Hex Wrenches (1.5mm, 2.0mm, 2.5mm, 3.0mm)
  • (1) Cross Wrench
  • (1) 17mm Wheel Wrench
icon-how-to
Needed to Complete
  • (4) AA Batteries for Transmitter
  • (2) 7.4V Batteries
  • (1) Battery Charger
1/8 Inferno Neo3.0 VE 4X4 Off-Road 4S Brushless Buggy RTR, Green

Introduction

Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor and ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE allows anyone to test the bounds of common sense with powerful brushless motor acceleration.

Features

  • Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
  • Full-time 4WD with low C of G 3-diff shaft drive.
  • Big Bore oil shocks and 4-wheel independent double wishbone suspension.
  • Full bearing specifications with 18 ball bearings on drive system and suspension.
  • Features thick suspension arms with high torsional rigidity.
  • Wide variety of optional parts is available to upgrade the chassis.
  • Equipped with 1.0 module metal main gear, designed for hard running.
  • Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
  • Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

Video Overview

 

Anodized Finish Aluminum
Anodized Finish Aluminum

Shares the same stylish gun metallic anodized finish aluminum parts as Kyosho’s flagship “Inferno MP9”.

 

TORX8 Brushless Motor
TORX8 Brushless Motor

KYOSHO SPEED HOUSE TORX8 brushless motor delivers powerful acceleration. 2-piece motor mount allows easy backlash adjustment and removal of motor.

 

BRAINZ8 ESC
BRAINZ8 ESC

KYOSHO SPEED HOUSE BRAINZ8 ESC with electric cooling fan features a 10-item program that allows precision adjustments such as brake, timing advance, cutoff voltage and heat protection.

 

Large Big Bore Shocks
Large Big Bore Shocks

Large Big Bore resin oil shocks produce excellent surface tracing. High-strength aluminum shock stays deliver full shock absorber performance.

 

Adjustable Alignment
Adjustable Alignment

Turnbuckle upper arms and steering tie rod can be adjusted to optimize alignment setting to running conditions.

 

KS5031-09MW Steering Servo
KS5031-09MW Steering Servo

Included high-torque (KS5031-09MW) steering servo delivers nimble control feel. Features built-in high durability metal gears.

 

Lowered Chassis Height
Lowered Chassis Height

Lowered chassis height in combination with optimal weight balance and big bore shocks realizes high stability running performance.

 

KC Cross Tires
KC Cross Tires

Equipped with KC Cross Tires that are designed with a block pattern seen in motocross bikes. Wear-resistant, these tires deliver exceptional performance on any surface.

 

Printed Body
Printed Body

High visibility printed body is designed for airborne stability and control and is also pre-cut with decals applied.

 

Product Specifications

Power Type Electric
Gear Pitch 1.0 Module
Servos High-speed, high-torque steering servo
Product Weight 7.8lbs (3,550g) approximate
Tire Tread Block Pattern
Vehicle Type Buggy
Water-Resistant Yes
Outer Diameter 4.5" (115mm)
Product Width 12.1 in (307mm)
Radio Synchro KT-231P+
Approximate Assembly Time No assembly required
Body Trimmed and painted with green color scheme, rear wing included
Brakes Integral wirth ESC
Scale 1/8
Bushing Material Metal
Charger Sold Separately
Differential Machined bevel gears
Max Battery Dimensions 3.3 x 1.4 x 0.71" (85 x 35 x 18mm)
Receiver Included
Shock Type Big bore oil-filled resin body
Wheel Type 10-spoke plastic 1:8 scale buggy
Motor Type Brushless
Wheelbase 12.7 - 12.9 in (323 - 328mm)
Battery Two 7.2V NiMH, or two 7.4V LiPo with T-plug connector
Connector Type Deans
Internal Gear Ratio 12.7:1
Motor Size 2000Kv
Product Length 19.5 in (496mm)
Suspension 4-wheel Independent
Ball Bearings Full set, 18 total
Chassis Aluminum
Completion Level Ready-To-Run
Drivetrain 4WD
Product Height 7.4 in (189mm)