Tamiya TB-05 PRO Chassis Kit

Tower Stock# TAMC1184  •  Manufacturer Stock# TAM58658
Tamiya TB-05 PRO Chassis Kit (large view)
Easy Pay
Request 3 Payments ($107.74, $107.73, $107.73) Details
Notes from our tech department:

FEATURES

Chassis: Integrated lower deck and side frame sections for a more
symmetrical design for balanced steering response, chassis has two
motor installation layouts for fine tuning balance
Drive: Four wheel aluminum shaft drive
Transmission: Newly designed case provides increased stability
during acceleration
Differentials: Oil-filled gear type
Suspension: Racers can choose between inboard and outboard front
suspension setup, fully independent double wishbone type
Shocks: Aluminum body, oil-filled, short touring car type
Shock Towers: Carbon fiber 0.12" (3mm) thick
Steering: High-torque servo saver, Ackerman inspired by the Tamiya
TB EVO. 7, Ackerman refers to the effect of the inner front wheel
rotating faster than the outer front wheel during turns
Motor Mount: New motor guard protects motor upon impacts
Ball Bearings: Shielded
Bumper: Front foam
Wheels: Six spoke gun-metal gray in color, 1" (25.4mm) wide,
1.9" (48mm) diameter
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Adjustable, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
in relation to the chassis

INCLUDES

Tamiya TB-05 Pro On-Road Touring Car Chassis Kit with Wheels, Shocks,
Shock Oil, 24T Pinion Gear, 63T Spur Gear and Instructions

REQUIREMENTS

Radio: 2-channel with steering servo
AA Batteries for Transmitter
Motor: 540 size
Electronic Speed Control: Compatible with selected motor
Battery: 7.2V NiMH
compatible with IFMAR/ROAR battery pack sizes
Charger: Compatible with selected battery
Body, tires, building and track equipment

SPECIFICATIONS

Length: 14.6" (370mm)
Width: 7.4" (187mm)
Wheelbase: 10.1" (257mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x8mm Diff Joint Cup 1 DTXC1523
2 5x10mm Rear Diff Gear 1 DTXC1535
2 5x10mm Front Axles 1 DTXC1535
2 5x10mm Rear Axles 1 DTXC1535
2 5x10mm Fr Pilot Shaft 1 DTXC1535
4 5x8mm Steering Linkage 4 DTXC1523
1 5x9mm flanged Motor Plate 1 Not Carried
1 5x9mm Main Shaft 1 DTXC1531

jxs 12/14/18
ir/jxs

Resources

References

Manufacturer Contact Information