Dumas Tiger Moth Kit 35"

Tower Stock# LXNHY4  •  Manufacturer Stock# 1810
Dumas Tiger Moth Kit 35
Notes from our tech department:
This is the radio controlled, electric powered
Dumas DH-82 Park Flyer Kit.


Construction: Hand selected laser cut balsa
Vacuum molded cowl and spinner
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, tail wire skid
requires bending


All balsa, lightweight colored (black and white) tissue covering
two 1-3/4" (45mm) lightweight foam main wheels, tail wire skid,
lightweight plastic tail wheel, CA hinges and all hardware to
complete kit, instruction manual, two full-size plan sheets,
acetate sheet for windows and vacuum molded cowl and spinner


GWS IPS (indoor power system) motor with "A" ratio gear drive
3 channel radio system (minimum)
3 micro servos
2 cell 700mAh LiPo battery
GWS 9x7 prop
Building and field equipment


Length: 25" (635mm)
Wingspan: 35" (889mm)
Wing Area: 352sq.in. (22.74 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 3-7/16" 87.5mm) back from the leading edge
of the TOP wing
Control Throws-
Elevator, Up and Down: 1/2" (13mm)
Rudder, Left and Right: 1" (25.5mm)

rmb 9-21-06

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info