Venom Graphene LiPo 4S 14.8V 1300mAh 90C UNI 2.0

Tower Stock# VNRE5070  •  Manufacturer Stock# 35070
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the Venom Graphene 4S 14.1V 1300mAh Drone Racing LiPo Battery
with the UNI 2.0 Plug.


Lower internal resistance and less voltage sag under load than
standard LiPo batteries
Engineered for the extreme demands of today's FPV racing pilots
Graphene packs stay cooler under extreme conditions
5C fast charge capable for up to five times faster charges
UNI 2.0 plug system utilizes a true Amass XT60 connector that
attaches to the included Deans and EC3 adapters


4S 14.8V 1300mAh Drone Racing LiPo Battery with UNI 2.0 Plug
Compatible with XT60, Dean's and EC3 Plugs


LiPo Compatible Charger/Balancer
LiPo Charging Bag


C Rate: 90C
Volts: 14.8
Capacity: 1300mAh
Cell Count: 4S
Cell Configuration: 4S1P
Continuous Discharge: 90C (117A)
Min Volts per Pack: 12V
Max Burst Rate: 180C (234A)
Max Volts per Cell: 4.2V
Max Volts per Pack: 16.8V
Watt Hours: 19.24
Charge Rate: 1C (1.3A)
Max Approved Charge Rate: 5C (6.5A)
Wire Gauge: 12AWG low resistance silicone wire
Plug Type: Venom UNI 2.0 Plug. Compatible with XT60, Dean's and
EC3 Plugs
Dimensions: 3 x 1.3 x 1.3" (75 x 34 x 34mm)
Weight: 5.7oz (162g)


ALWAYS use a LiPo-approved charger/cell balancer
NEVER charge over 4.2V per cell
NEVER charge at currents greater than 5C
NEVER trickle charge
NEVER allow to discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children

jxs 12/18/17


Manufacturer Contact Information