MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive,|
Easy, Clean, and When Compared to old fashioned Coverings, Quick To Use.
For great covering ideas and to insure a professional finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.
Super Strong with a Tensile Strength of 25,000 psi (poundssq in)
Lightweight at Only 0.2 ozsq ft
Dry Adhesive Activates When Heat is Applied
Shrinks to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Waterproof
Stronger and Lighter Than Traditional Silk and Dope Coverings
May be Cleaned with Glass Cleaner, 409 or MonoKote CleanerPolish
One (6 x 26) Roll of Metallic Platinum Covering
One Instruction Sheet
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
Vary Slightly In Color Between Production Runs of These Products.
If Using Three or More Rolls of the Same Color, it is Suggested to
Use a 25 Roll (TOPQ1408) To Ensure the Same Dye Lot for the Entire
Model Being Covered.
LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its
LustreKote Paint: NONE
MonoKote Trim Sheet: NONE
MonoKote is a High Temperature Covering, NOT For Use Directly On Foam
EconoKote IS For Use Directly On Foam, Use the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
(EconoKote may be used on top of, but not under MonoKote.)
Attaching to Wood: 215 - 240F (activating the glue)
Partial Shrinkage: 230 - 270F
Maximum Shrinkage: 270 - 350F