Tamiya 1/10 Ferrari 458 Challenge Kit

Tower Stock# TAMC8560  •  Manufacturer Stock# 58560
Notes from our tech department:
This is the electric powered, radio controlled, 1/10 scale,
Ferrari 458 Challenge On-Road Car Kit from Tamiya.


Chassis: TT-02 ABS resin bathtub type, with skid shaped underside to
reduce contact with track surface during cornering
Drive: Four wheel shaft
Motor: 540 brushed
Motor Mount: Plastic, allows the use of up to ten different gear
ratios, compatible with 380 size motors
Electronic Speed Control: TEU-105BK
Gearboxes: Fully enclosed with 4-pinion resin differential gears
Suspension: Four wheel independent double wishbone
Transmission: Single speed
Shocks: Plastic body, friction type
Body: Clear untrimmed polycarbonate, with window mask and body trim
decals, red plastic mirrors and head/tail light nacelles
Spur Gear: 70 tooth plastic
Pinion Gear: 22 tooth metal
Bumper: Front urethane
Tires: Rubber slicks 0.94" (24mm) wide, (64mm) outer diameter
Wheels: one set no offset,lace pattern gray in color,
2.0" (52mm) outer diameter
0.94" (24mm) wide
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable front only, caster/toe-in refers to the angle
of the front suspension when viewed from the side of the car in
relation to the chassis


Tamiya Ferrari 458 Challenge Car Kit, with ESC, 540 size motor, clear
body, slick tires, one set of wheels, decals, window mask sheet,
and instructions


Radio: 2-channel with high speed steering servo
Battery: 7.2V 6-cell stick pack with standard connector
Battery Charger: To match selected battery
AA batteries to transmitter
Building and track equipment


Specs such as length, width, height and weight not provided by
Wheelbase: 9.9-10.1" (251-257mm) adjustable
Length: 17.1" (435mm)
Width: 7.3" (186mm)
Height: 3.8" (97mm)


To upgrade to ball bearings order;
Qty. Size Location Qty Bearing Set
2 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
4 8x12mm Differential 2 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Rear Uprights 1 DTXC1535

jxs 05/09/13
updated 10/28/13 bal



Manufacturer Contact Information