Hobbico NexSTAR Brushless EP Trainer Select RTF 36

Tower Stock# LXSGY136  •  Manufacturer Stock# HCAA09**
Hobbico NexSTAR Brushless EP Trainer Select RTF 36 (large view)
Notes from our tech department:
This is the electric powered, radio controlled Ready-To-Fly
Hobbico NexSTAR BL Select Brushless Trainer Airplane.
For Beginner Modeler/Fliers 14 Years of Age and Older.

With such features as the Futaba Pilot Assist Link, SpinControl
Airfoil Extensions, SpeedBrakes Training Flaps and much more,
no other electric trainer offers so much help for the first-time pilot.


Construction: Balsa and plywood factory covered in Top Flite MonoKote
Wings: CenterCore Molded Composite Main Wing Rib maintains perfect
alignment and includes a built-in aileron servo mount, wing halves
are joined with a steel rod, SpinControl Airfoil Extensions
provide lift in a stall keeping the wing level
PivotFlex wing mounting system attaches with one nylon bolt
Airspeed Restrictor: SpeedBrakes Training Flaps attach to rear
section of wing near fuselage and hold airspeed to a minimum to
insure smooth landings, removeable as pilot skills increase
Motor: ElectriFly RimFire 42-50-800 Out-Runner Brushless (GPMG4700)
Brushless electronic speed control with dual Dean's Ultra Plugs,
large heatsink, and 14 guage motor and battery leads
Radio: Factory installed Futaba 6EXA 6-channel computer radio system
with trainer system, six model memory, and 3 installed S3003 servos
also includes the Futaba PA-2 Pilot Assist Link which
returns airplane to level flight due to such factors as wind or
overcorrection of controls, just release sticks and the PA-2
automatically returns aircraft to level flight
Receiver Battery: 4-Cell, 700mAh NiCD square pack (AA size cells)
Landing gear: Duraluminum SnapGear Quick Landing Gear Mounts
(US Patent #6,886,780)
2.75" (70mm) diameter nose wheel, 2.75"(70mm) diameter main wheels
Tail Mounting: EasyAlign System guides parts into place automatically
in perfect alignment without tools
Aileron Control: Single servo control
Cowl: Painted fiberglass
Propeller: Nylon 10x5 (APCQ4120)
Front hatch with magnetic latch provides easy access to batteries
Building Time: Ready To Fly in approximately 20 minutes
Warranty Period: Hobbico guarantees this kit free from defects in
both material and workmanship at the date of purchase. This
warranty does not cover any component part damaged by use or


Hobbico NexSTAR BL Select Brushless Trainer Airplane with ElectriFly
RimFire 42-50-800 Out-Runner Brushless motor, ESC, prop, three
wheels, Futaba 6EXA 6-channel computer radio system, PA-2 pilot
assist link, RealFlight NexSTAR disc with transmitter interface,
and photo-illustrated instructions


Batteries: Two 9.6V 3600mAh NiMH
Peak Charger


Wingspan: 68.5" (1740mm)
Wing Area: 722 sq in (46.6sq dm)
Weight: 7-8.5lb (3175-3855g)
Wing Loading: 22-27 oz/sq ft (68-83 g/sq dm)
Length: 56" (1410mm)
CG (Center of Gravity): Forward Limit 3-1/4" (83mm) from leading edge
Aft Limit 3-5/8" (92mm) from leading edge
Control Throws:
Ailerons: " (13mm) up and down
Elevator: " (13mm) up and down
Rudder: " (19mm) left and right
Flaps " (13mm) down


The MonoKote colors used on this model are Sapphire Blue - TOPQ0226,
Jet White - TOPQ0204, Aluminum - TOPQ0205, Charcoal - TOPQ0407 and
Black - TOPQ0208

jxs 8/09/07
updt jxs 09/21/11

Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info