Axial 1/10 SCX10 III Jeep JLU Wrangler w/Portals Kit

Tower Stock# LXMDJP  •  Manufacturer Stock# AXI03007
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:

FEATURES

Chassis: Adjustable steel C-channel, different size links included to
build either 11.4 in, 12 in, or 12.3 in wheelbase
Drive: Four wheel with all metal portal gears that provide more
ground clearance
Portal Axles: New AR44 Portal Axles feature an offset front housing
for more realistic looks, portal gears in axle housings provide
more ground clearance
Differential Locker: Hypoid gears that are smaller in size and,
and that also improve gear reduction at the axle and reduction of
torque twist
Transmission: All metal gears, 2 speed and Dig functions, driver
can choose either option, or run both with a 4-ch receiver and 2
servos, 2 speed option increases vehicle speed approximately 20,
Dig function locks out rear axle creating an anchor effect that
allows front drive to pull vehicle around in tight locations
Steering: Universal joints on axles provide 45 degrees of steering
Suspension: Stainless steel pivot balls at all points for greater
durability, revised geometry reduces torque twist and allows more
fine tuning
Shocks: Oil-filled, new O-ring material for better sealing, and a
bleed screw in emulsion style cap for easier bleeding
Body: Jeep JL Wrangler Unlimited Rubicon clear body with molded hood
vents, grille, light buckets, Rubicon fender flares, door handles,
wipers, molded steering wheel. driver, roll cage and more
Battery Mount: New location near center for better balance, areas on
side pods for smaller size LiPo batteries
Tires: Nitto Terra Grappler MT, super sticky R30 compound, height
and width increased to 4.7 x 1.77 in
Wheels: Injection molded 3-piece beadlock Licensed KMC XD Machete
with satin silver finish
Ball Bearings: Full set

INCLUDES

Axial 1:10 scale SCX10 III Jeep JLU Wrangler Kit with Portals
Jeep JL Wrangler Unlimited Rubicon Clear Body
Tires and Wheels
Instruction Manual

REQUIREMENTS

Radio: 4-channel transmitter and receiver
Steering Servo: High torque
Micro Servo: Two (one each for rear dig and 2-speed feature)
Motor: Axial 35T
ESC: Axial AE-5L recommended
Battery: Standard or shorty pack, 6-cell NiMH, or standard 2S LiPo
Battery Charger and LiPo Charging Bag
AA Batteries for transmitter
Building and Track Equipment

SPECIFICATIONS

Length: 19.125 in (485mm)
Width: 9.25 (234mm)
Height: 9.5 (241mm)
Ground Clearance: 3 (76.2mm)
Adjustable Wheelbase: 11.4 in, 12 in, 12.3 in (289mm, 305mm, 312mm)
Weight: 6.5lbs (2.9kg)
Front and Rear Track: 8.9 in (226mm) distance from outer edges of
tires measured side-to-side
Tire Diameter: 4.7 in (119mm)
Wheel Diameter: 1.9 (48.3mm)
Wheel Width: 1 (25.5mm)
Gear Pitch: 32P
Pinion Gear: 14T
Final Drive Ratio: 45.6:1
Approximate Assembly Time: 7-9 hours

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location
2 7x14x3.5mm Fr Ring GearLocker
2 7x14x3.5mm Rear Ring GearLocker
1 5x11x4mm Fr Portal Axle
1 5x14x5mm Fr Portal Axle
1 5x11x4mm Rear Portal Axle
1 5x14x5mm Rear Portal Axle
2 10x15x4mm Portal Knuckle Assembly
2 5x13x4mm Portal Knuckle Assembly
4 5x11x4mm Portal Knuckle Assembly
9 5x11x4mm Transmission Assembly
1 4x8x3mm Transmission Assembly
2 5x10x4mm Transmisson Assembly
1 15x21x4mm Transmision Assembly
3 5x11x4mm Trans Input Gears
Order numbers for ball bearings can be found in the
Optional Parts and Accessories Section.

jxs 031720
irjxs

Resources

References

Manufacturer Contact Information