Axial 1/10 SCX10 III Jeep JLU Wrangler w/Portals Kit

Tower Stock# AXIC1367  •  Manufacturer Stock# AXI03007
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments of $123.33 Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:

FEATURES

Chassis: Adjustable steel C-channel, different size links included to
build either 11.4 in, 12 in, or 12.3 in wheelbase
Drive: Four wheel with all metal portal gears that provide more
ground clearance
Portal Axles: New AR44 Portal Axles feature an offset front housing
for more realistic looks, portal gears in axle housings provide
more ground clearance
Differential Locker: Hypoid gears that are smaller in size and,
and that also improve gear reduction at the axle and reduction of
torque twist
Transmission: All metal gears, 2 speed and Dig functions, driver
can choose either option, or run both with a 4-ch receiver and 2
servos, 2 speed option increases vehicle speed approximately 20,
Dig function locks out rear axle creating an anchor effect that
allows front drive to pull vehicle around in tight locations
Steering: Universal joints on axles provide 45 degrees of steering
Suspension: Stainless steel pivot balls at all points for greater
durability, revised geometry reduces torque twist and allows more
fine tuning
Shocks: Oil-filled, new O-ring material for better sealing, and a
bleed screw in emulsion style cap for easier bleeding
Body: Jeep JL Wrangler Unlimited Rubicon clear body with molded hood
vents, grille, light buckets, Rubicon fender flares, door handles,
wipers, molded steering wheel. driver, roll cage and more
Battery Mount: New location near center for better balance, areas on
side pods for smaller size LiPo batteries
Tires: Nitto Terra Grappler MT, super sticky R30 compound, height
and width increased to 4.7 x 1.77 in
Wheels: Injection molded 3-piece beadlock Licensed KMC XD Machete
with satin silver finish
Ball Bearings: Full set

INCLUDES

Axial 1:10 scale SCX10 III Jeep JLU Wrangler Kit with Portals
Jeep JL Wrangler Unlimited Rubicon Clear Body
Tires and Wheels
Instruction Manual

REQUIREMENTS

Radio: 4-channel transmitter and receiver
Steering Servo: High torque
Micro Servo: Two (one each for rear dig and 2-speed feature)
Motor: Axial 35T
ESC: Axial AE-5L recommended
Battery: Standard or shorty pack, 6-cell NiMH, or standard 2S LiPo
Battery Charger and LiPo Charging Bag
AA Batteries for transmitter
Building and Track Equipment

SPECIFICATIONS

Length: 19.125 in (485mm)
Width: 9.25 (234mm)
Height: 9.5 (241mm)
Ground Clearance: 3 (76.2mm)
Adjustable Wheelbase: 11.4 in, 12 in, 12.3 in (289mm, 305mm, 312mm)
Weight: 6.5lbs (2.9kg)
Front and Rear Track: 8.9 in (226mm) distance from outer edges of
tires measured side-to-side
Tire Diameter: 4.7 in (119mm)
Wheel Diameter: 1.9 (48.3mm)
Wheel Width: 1 (25.5mm)
Gear Pitch: 32P
Pinion Gear: 14T
Final Drive Ratio: 45.6:1
Approximate Assembly Time: 7-9 hours

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location
2 7x14x3.5mm Fr Ring GearLocker
2 7x14x3.5mm Rear Ring GearLocker
1 5x11x4mm Fr Portal Axle
1 5x14x5mm Fr Portal Axle
1 5x11x4mm Rear Portal Axle
1 5x14x5mm Rear Portal Axle
2 10x15x4mm Portal Knuckle Assembly
2 5x13x4mm Portal Knuckle Assembly
4 5x11x4mm Portal Knuckle Assembly
9 5x11x4mm Transmission Assembly
1 4x8x3mm Transmission Assembly
2 5x10x4mm Transmisson Assembly
1 15x21x4mm Transmision Assembly
3 5x11x4mm Trans Input Gears
Order numbers for ball bearings can be found in the
Optional Parts and Accessories Section.

jxs 031720
irjxs

Resources

References

Manufacturer Contact Information