Tamiya 1/10 Toyota 4x4 Pick-Up Mountain Rider Ltd

Tower Stock# LXLFUW  •  Manufacturer Stock# TAM47394
Notes from our tech department:
For modelers 10 years of age and older.


Chassis: Ladder type, steel channel and resin cross members, front
metal underguard
Drive: Four wheel shaft
Differentials: Enclosed in die cast housings
Motor: 540 size brushed
Bushings and Ball Bearings
Suspension: Metal axle housings, leaf springs and shackles, radius
rod in rear
Shocks: Four, friction type aluminum bodies, tension can be adjusted
with separately available friction grease
Gearboxes: Closed
Transmission: 3-speed
Body: Rigid injection molded White in color, window set, plated
plastic bumpers, roll bar and body trim, plastic light lenses can
accomodate separately available LED light kit
Tires: 4.8" (123mm) diameter
Wheels: Metal plated with grayish chrome finish
Bumpers: White in color
Camber Tie Rods: Non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Steering: Bell-crank type with servo saver, 4-wheel steering can be
added by installing rear axle tension rod


Tamiya 1/10 scale Toyota Mountain Rider Limited Edition Pickup Truck
with Friction Shocks, 540 Motor, Molded Body, Window Section, Body
Trim, Decals, Plastic Light Lenses, Tires, Wheels, Instructions


Radio: 4-channel with 2 Servos
Radio Batteries: (8) AA size
Speed Control: Electronic with reverse
Battery: 6-cell stick pack with standard Tamiya connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment


Length: 21" (525mm)
Width: 10.9" (278mm)
Height: 10.8" (275mm)
Wheelbase: 11.3" (287mm)
Front Tread: 7.9" (200mm)
Rear Tread: 8.6" (218mm) distance from center of tires measured

jxs 07/16/19




Manufacturer Contact Information