E-flite F-15 Eagle 64mm EDF BNF w/AS3X & SAFE

Tower Stock# LXLCWL  •  Manufacturer Stock# EFL9750
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($60.01, $59.99, $59.99) Details
Money Saving Combos
Notes from our tech department:
Skill Level 2-Some Experience Required


Construction: EPO
Wing: Two-piece bolt-on with joiner tube, removable tanks and
Brushless Motor: E-flite 2840-3150 outrunner, 4S LiPo compatible
Ducted Fan: 2.5" (64mm) diameter, 11 blade
Servos: Five 9g
Electronic Speed Control: E-flite 40A with EC3 battery connector
Receiver: Spektrum 6-ch AR636A DSMX with AS3X (Artificial
Stabilization - 3aXis) that counters effects of wind and turbulence
by combining 3-axis sensing with specially tuned flight control
software, also includes Panic Recovery Mode, a feature of SAFE
Select (Sensor Assisted Flight Envelope) that offers pitch and bank
angle limits along with self-leveling that can be turned on and off
at the flip of a switch
Landing Gear: Prebent wire, tricycle configuration


E-flite BNF (Bind-n-Fly) EDF Sport Scale F-15 Eagle Airplane
40A Brushless Electronic Speed Control
3150kV Brushless Outrunner Motor
Spektrum AR636 6-Channel Receiver
Five 9G Servos


Radio: At least 6-channel
LiPo Battery: 4S 2200mAh 30+C with EC3 or IC3 connector, SPMX22004S30
Spektrum 2200mAh Smart Battery recommended
Battery Charger: To match selected battery
LiPo charging bag, field equipment


Wingspan: 28.15" (715mm)
Length: 38.6" (980mm)
Weight: 34-38oz (964-1077g)
Airfoil: Semi-symmetrical
Approximate Flying Speed: 70mph
Experience Level: Skill level 2-some experience required
Approximate Assembly Time: Less than 1 hour
Recommended Environment: Outdoor
Center of Gravity, CG: 3.3-3.5" (85-90mm) from the leading edge of
the wing measured at the fuselage
Control Throws Low Rate High Rate
Elevator, up/down: 0.55" (14mm) 0.79" (20mm)
Aileron, up/down: 0.47" (12mm) 0.59" (15mm)

jxs 01/29/19