Tekno RC 1/10 ET410 4WD Competition Truggy EP Kit

Tower Stock# LXJKTJ  •  Manufacturer Stock# TKR7200
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Easy Pay
Request 3 Payments of $143.33 Details
Notes from our tech department:


Chassis: 0.12 (3mm) thick CNC machined aluminum, milled to reduce
Drive: Four wheel with lightweight 7075 aluminum tapered center
driveshafts and captured CVA front and rear driveshafts with heavy
duty 6mm stub axles
Differentials: Three high volume fluid filled adjustable, high
strength gears, split center mount for easy maintenance
Suspension: Adjustable front arm sweep and angle, captured outer
front and rear hinge pins, CNC machined adjustable hinge pin braces
long rear sway bar for improved consistency, 3mm inner and outer
hinge pins, polished for smooth action
Shocks: Oil-filled 13mm diameter hard anodized aluminum body with
locking spring perches and 3.5mm shock shafts with revised dual
guide X-ring cartridges
Shock Towers: Composite, front 0.39 (10mm) thick, rear 0.31 (8mm)
Steering: Fully ball raced reverse bellcrank steering system,
adjustable stops
Motor Mount: Two-piece CNC machined aluminum, integral fan mount
Spur Gear: 53 tooth 32 pitch
Caster: Adjustable, castertoe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, 7 aluminum caster blocks
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Tekno RC 110 scale Radio Controlled, Electric Powered Truggy Kit
with Clear Body, Wing and Instruction Manual


Radio: 2-channel
Steering Servo: Standard size high torque, at least 200 ozin
Motor: 540 size 6.5 - 8.5 turn, OR 540 size 4-pole 4000 - 4600Kv
(550 size motor not recommended)
LiPo Battery: 2S 7.4V Shorty configuration, at least 5000mAh
Battery Charger and Charging Bag: Compatible with selected battery
Wheels and Tires: 110 scale Associated offset stadium truck, or
Slash SC offset wheels and tires (Losi offset NOT compatible)
Pinion Gear: 32 pitch 10 - 25 tooth
Building and track equipment


Length: 15.5 (393mm) without wing, 16.7 (424mm) with wing
Width: 12.7 - 13 (322 - 330mm)
Weight: 4.1 - 4.5lbs (1850 - 2025g) depending on equipment
Diff Ratio: FR 1040t, Center 53t
Battery Tray Dimensions: 3.8 x 1.8 x 1.02 (96 x 47 x 26mm)
Ackermann: Adjustable, Ackermann refers to the effect of the inner
front wheel rotating faster than the outer front wheel during turns
Front Shock Oil Weight: 550cst
Rear Shock Oil Weight: 350cst
Wheel Hex Size: 12mm


For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 4x7x2.5mm Steering Rack 1 TKRC0725
4 10x15x4mm Fr Bulkhead 1 TKRC1154
2 5x11x4mm Fr Bulkhead 1 TKRC5514
4 10x15x4mm Rear Bulkhead 1 TKRC1154
2 5x11x4mm Rear Bulkhead 1 TKRC5514
2 10x15x4mm Rear Hubs 1 TKRC1154
2 6x12x4mm Rear Hubs 1 TKRC6124
2 10x15x4mm Fr Hubs 1 TKRC1154
2 6x12x4mm Fr Hubs 1 TKRC6124
2 10x15x4mm CtrRear Assembly 1 TKRC1154

jxs 031519



Product Documents & Files

Manufacturer Contact Information