Kyosho INFERNO MP9 TKI4-10th Anniv Special Edition

Tower Stock# LXJHKZ  •  Manufacturer Stock# 33011B
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
Easy Pay
Request 3 Payments ($206.67, $206.66, $206.66) Details
Notes from our tech department:
This is the 1/8 scale Glow Powered, 2.4GHz Radio Controlled,
Inferno MP9 TKI4 10th Anniversary Special Edition Buggy Kit from Kyosho.

Upgrades from the latest Inferno MP9 TKI4 include;
**HD Coated Front and Rear Shock Cases**
**1.3x8 Hole Shock Pistons**
**Aeration Shock Caps**
**Serrated Wheel Nuts**
**Short Type Hard Front Shock Tower (High Mount) Gunmetal Color**
**Aluminum Hard Front Upper Suspension Holder (High Mount)**
**17.5 Degree Front Hub Carriers**
**47T Spur Gear**
**Lightweight Shock Bushings**
**New Brake Pads**

FEATURES

Chassis: 0.12" (3mm) thick 7075 aluminum with wrap around side guards
molded front and rear chassis braces
Drive: Four wheel shaft with 3.5mm thick swing shafts, mud guards on
arms prevent dirt from entering drive shafts
Differentials: Three, high capacity center diff, narrow light weight
front and rear diffs, lightweight bevel shafts in the front, center
and rear diffs improves throttle on/off response and braking
Shocks: Hard coated threaded Big Shock cases for smooth damping over
an extended period, new 1.3mm x 8 hole pistons for a wide range of
course conditions
Shock Towers: 0.20" (5mm) thick 7075 aluminum, grooved shock mounting
pins
Suspension: Upper front arm is 2mm higher than the TKI4, hard front
shock stay and front upper suspension holder for optimal camber
change and improved initial steering response
Spur Gear: 47T for improved throttle response and acceleration
Brake Pads: Extra thick semi-metallic, special adhesion of pad to
plate for better durability and reliability
Clutch Shoes: Three, heavy duty aluminum
Wheels: White in color 3.3" (83.5mm) diameter, 1.6" (42mm) wide,
17mm hex
Ball Bearings: Full set included
Fuel Tank: Includes splash guard, 4.2oz (125cc) capacity
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
front hub carrier modified to increase caster from 13 to 17
for greater stability on bumpy surfaces and tight cornered courses
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Radio Box: Low profile design protects components from dust and dirt
Body: Clear
Rear Wing: Newly designed, two additional vertical fins for better
stability and removable gurney flap for increasing rear grip,
newly designed wing stay with increased mounting surface area
Servo Mount: Upright for easy maintenance and dropped 2mm for better
center of gravity

INCLUDES

Inferno MP9 TKI4 Buggy Kit with Body, Decals, Wheels, Instructions,
Rear Wing, Diff Oil, Fuel Tank, Fuel Filter, Air Filter, Servo
Horns and Fuel Tubing

REQUIREMENTS

Radio: 2-channel w/high torque steering servo
Engine: .21 cu in
Exhaust: Manifold and muffler for 1/8 scale buggy
Starter Box: For 1/8 scale buggy
Tires: 1/8 scale buggy
Glow Fuel: Car blend with 10-30% nitro content (20% required for
break-in
Fuel bottle, glow igniter
Maintenance and track equipment

SPECIFICATIONS

Vehicle;
Length: 19.2" (490mm)
Width: 12.0" (307mm)
Height: 7.1" (180mm)
Wheelbase: 12.7" (325mm) 4 settings with rear hub collar position
changes
Ground Clearance: 0.8" (28mm)
Gear Ratio: 11.96:1
Front & Rear Tread: 10" (254mm) distance from center of tires
measured side-to-side
Weight: 104oz (2,950) approximately
Body;
Length: 15" (378mm)
Width: 8" (203mm)
Height: 3.8" (96mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
3 8x16mm Front Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 5x10mm Clutch Bell 1 DTXC1535

jxs 08/28/18
ir/jxs

Resources

References

Manufacturer Contact Information