Axial SCX10II Raw Builders Kit

Tower Stock# LXJHHK  •  Manufacturer Stock# AXI90104
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($66.67, $66.66, $66.66) Details
Notes from our tech department:

FEATURES

Chassis: Scale steel C-channel side rails with adjustable body mount,
adjustable bumper mounts with swaybar mounting points, mounting
points for optional 2-speed and servo winch, adjustable CMS
(Chassis Mounted Servo) system (servo not included), additional
holes aaded to rear frame section for wheelbase adjustments
Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar
driveshafts, UVJ style front driveshafts for up to 45 of steering
angle, full ball bearing drivetrain
Slipper Clutch: Dual slipper design uses a pad on each side of spur
gear for added surface contact area, 32p gearing for high torque
applications
Transmission: All metal gear AX10 three gear layout, metal motor
plate, adjustable ratio for high speed or competition level
crawling speed
Differentials: Bevel gear 30T/8T
AR44 Hi-Pinion Axle: Pinion gear is 6mm above center for added ground
clearance and better driveshaft angles, high pinion design has
increased surface contact for greater durability, single piece
axles with molded truss for extreme durability, helical CNC cut
internal gears, sintered metal single unit ring/gear locker
CNC cut pinion gear, optimized 3.75 gear ratio for reduced torque
twist
Battery Tray: Easy access front mount, accomodates batteries up to
5.75 x 1.2" (147 x 32mm) 3S, 5000mAh, with battery posts in
position dimensions are reduced to 5.4 x .94" (138 x 24mm)
Suspension: Optimized suspension geometry with integrated mounts
upper and lower aluminum links, 4-link design reduces axle steer
and torque twist, and guards against suspension wrap-up in high-
power applications, all steel links
Shock Type: Coil over, oil-filled
Wheelbase: Mounting hardware to build an 11.4", 12", or 12.3"
wheelbase kit
Front Bumper: Mid-width CRC

INCLUDES

1/10 scale, electric powered Axial SCX10II All Terrain Raw Build Kit
with Decal Sheet, Hardware and Instruction Manual

REQUIREMENTS

Radio: 2-3 channel
Steering Servo: High-torque
Motor: Brush equipped, water resistant
ESC: To match selected motor
Battery: 6-cell NiMH or 2S LiPo
Battery Charger: To match selected battery
Wheels: 1.9" off-road with 12mm hex such as the Axial Method 1.9"
Tires: All-terrain
Body: 1/10 scale
LiPo charging bag (if using LiPo battery) and track equipment

SPECIFICATIONS

Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (239.4mm)
Ground Clearance: 3" (77mm)
Wheelbase: 11.4" (287mm), 12" (304.8mm), 12.3" (312.4mm)
Weight: 4lbs (1.8kg)
Final Drive Ratio: 40.44
Final Drive Ratio Range: 33.69 - 54.15
Pinion Gear: 15 tooth, 32 pitch
Spur Gear: 56 tooth, 32 pitch
Assembly Time: 5-7 hours

COMMENTS


Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info