Top Flite Replica Radial Engine 1/7 Scale

Tower Stock# LXHY66  •  Manufacturer Stock# TOPQ7901
Top Flite Replica Radial Engine 1/7 Scale (large view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Quantity Discounts Available
Save $1.08
2 for $22.90
Save $1.80
3 for $34.17
Save $3.96
6 for $67.98
Notes from our tech department:
This is an Optional Dummy Radial Engine for Any 1/7 Scale Airplane. It is
patterned after the Pratt & Whitney radial engines that powered numerous
aircraft from the "Golden Age" of aviation. Modeled to fit the Top Flite F4U
Corsair and AT-6 Texan, this 1/7 scale radial will fit any cowls with a frontal
opening of 6 to 7". Not only does the dummy engine enhance scale apperance,
but it also serves as an air-flow baffle for more efficient engine cooling.


Perfect for Top Flite Corsair or AT-6
Ideal for any 1/7 scale warbird
Improves air-flow over engine
Precise scale enhances appearance
Easy to assemble and paint
Includes full instructions


One White plastic sheet with Dummy engine
Three White Plastic push rod tubes (8" in length)
One Wire for ignition leads (16" in length)
One Fully illustrated instruction sheet


Hobby knife w/#11 blade
Hand Drill or Dremel Moto Tool
1/16" & 1/8" Drill bits
1/8"x8"x8" Lite plywood
Round file or " Drum sander
Small Paint brushes
Paint (Gunship gray, Euro gray, Light gray, Silver, Black, Gold,
Primer, and Clear coat)
Scroll or coping saw
Rubber cement or spray adhesive
100 & 240 grit sandpaper


6" wide, 1" deep when trimmed to fit the model
6/14/94 krh

See Tower Catalog page 66.
Parts Compatibility
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info