Hangar 9 Piper J-3 Cub 40 ARF

Tower Stock# LXHUSW  •  Manufacturer Stock# HAN4000
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($86.67, $86.66, $86.66) Details
Notes from our tech department:

FEATURES

Construction: Lightweight balsa and ply
Wing: Two piece with struts and wing tube
Covering: Hangar 9 UltraCote
Cowl: Fiberglass with molded-in dummy engine
Landing Gear: Prebent wire with steerable tailwheel, 3.35" (85mm)
main wheels, 1" (25mm) tailwheel
Engine Mount: One-piece
Fuel Tank: 11oz (325cc)
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.

INCLUDES

Hanger 9 Piper J-3 Cub 40, 80" Wingspan with Landing Gear, Fuel Tank,
Clear Plastic Windshield and Side Windows, Instruction Manual

REQUIREMENTS

Radio: 4-ch with five standard servos and receiver battery
Engine: .36 -.46 2-stroke, or .56-.82 4-stroke
Building and field equipment

SPECIFICATIONS

Wingspan: 80" (2032mm)
Fuselage Length: 49.9" (1268mm)
Wing Area: 919 sq in (59.3 sq dm)
Weight: 6.75-7.5lbs (3-3.4kg)
Center of Gravity, (CG): 3-1/4" (82.5mm) behind the leading edge of
the wing measured at the fuselage
Control Throws; Low Rate High Rate
Elevator: 9/16" 10 down 1" (18) down
11/16" (11.5) up 1-1/4" (19.5) down
Aileron: 1/2" (9) down 3/8" (8) up
1-1/16" (22) down 7/8" (21) up
Rudder, left and Right: 1-1/2" (28)

COMMENTS

Following are the UltraCote colors used to cover this model and
stock numbers for 2m rolls;
Cub Yellow, HANQ1141
Black, HANQ1129

If a replacement fuel tank is needed, the DuBro 10oz (DUBQ0210) with
the Gas Converion Stopper (DUBQ0675), or the Sullivan 10oz
(SULQ1440) with their Gas Conversion Kit (SULQ2684) may be used.
Some modification and trimming to the inside of the fuselage may be
required when installing any aftermarket tank.

jxs 08/03/18
ir/jxs

Resources

References

Product Documents & Files

Manufacturer Contact Information