Associated 1/10 ProSC10 RJ Anderson Rockstar BL 2WD RTR

Tower Stock# LXHALT  •  Manufacturer Stock# 70015
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments of $99.99 Details
Notes from our tech department:
This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Run 110 Scale
Team Associated ProSC10 RJRockstar Off-Road Short Course Truck.
**This version requires battery and charger.**

*No Parts From The SC10.1, SC10.2 or SC10.3 Are Compatible With This Vehicle*


Chassis: Low center-of-gravity molded composite chassis whook and
loop battery straps that accomodate NiMH and 2-3S LiPo packs
Drive: Rear wheel CVA drive shafts
Differential: Heavy-duty sealed gear, and externally adjustable V2
slipper clutch
Brushless Motor: Reedy 3300kV
Electronic Speed Control: Reedy SC600-BL with cooling fan
Radio: 2.4GHz 2-channel with DVC (Dynamic Vehicle Control) receiver
that automatically counter steers improving stability when vehicle
starts to slide, water-resistant enclosed receiver box
Steering Servo: Reedy 0712 metal gear, high-torque
Ball Bearings: Fourteen precision rubber sealed
Body: Trimmed and printed replica of the truck driven by RJ Anderson
in the Lucas Oil Off Road Racing Series
Wheels: KMC style, 3 (76mm) diameter, 1.6 (41mm) wide, black in
Tires: Multi terrain scale with reinforced sidewalls, 4.25 (108mm)
diameter, 1.7 (43mm) wide
Suspension: Fully adjustable geometry, vertical ball ends for roll
center adjustments
Shocks: Aluminum body oil filled, big bore
Caster: Adjustable, castertoe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Assembled ProSC10 Rockstar Short Course Truck with trimmed Body,
Radio, Motor, ESC and Instruction Manual


AA Batteries: Four for transmitter
Battery: 8.4V 7-cell NiMH at least 3000mAh with T-Plug connector
OR 2-3S LiPo, at least 3300mAh with T-plug connector
Battery Charger: Compatible with selected battery
Track equipment and LiPo charging bag if using LiPo battery


Length: 21.18 (538mm)
Width: 11.1 (282mm)
Wheelbase: 12.68 (322mm)
Weight: 4.28lbs (1928.6g)
Length: 21.2 (538mm)
Width: 11.8 (300mm) at rear wheels, widest point
9.4 (240mm) behind rear wheels, narrowest point
Height: 5.3 (136mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3x7x3mm Steering 2 DTXC1506
4 5x10x4mm Steering Blocks 2 DTXC1535
2 5x10x4mm Idler Gear 1 DTXC1535
2 10x15x4mm Gearbox 1 DTXC1595
2 5x10x4mm Gearbox 1 DTXC1535
2 10x15x4mm Rear Hubs 1 DTXC1595
2 6x13x5mm Rear Hubs 1 DTXC1573

jxs 031317



Product Documents & Files

Manufacturer Contact Information