Associated 1/10 RC10B6.1 Team 2WD Buggy Kit

Tower Stock# LXHAJV  •  Manufacturer Stock# 90020
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • out of package (see larger view)
Coupon discount not allowed by manufacturer for this product
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the 1/10 scale Radio Controlled, Electric Powered
RC10B6.1 Team Buggy Kit from Team Associated.
**Ideal choice for tracks with very high traction,**
**where a forward mass is beneficial and chassis roll need to be tamed**
**through a low center of gravity and anti roll bars.**


Chassis: Constructed of 7075 aluminum, shortened, --" (--mm) thick
Drive: Rear wheel, heavy-duty V2 rear axle with 67mm bones
Transmission: 3-gear laydown Stealth
Differential: Easy access ball type, height adjustment with 0, 1, 2,
and 3mm inserts
Suspension: Gull wing shaped arms for sharp feel and control
rear arm with molded inserts for ultra-fine lower shock mount
adjustment, front and rear anti-roll bars
Shocks: Machined pistons for smoother operation, V2 springs
Shock Towers: Heavy-duty V2 routed graphite, tower guard on front
shock tower, standard height rear tower
Body: JConcepts B6 clear body with wing, molded spur gear guard
protects body from damage
Ball Bearings: Factory Team upgraded ball bearing kit, ball bearings
are oiled instead of greased for less drag
Caster: Adjustable front and rear, caster/toe-in refers to the angle
of the front when viewed from the side of the car in relation to
the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RC10B6.1 Team Buggy Kit with Clear Body and Wing, Shocks, Ball
Bearings, Stealth Transmission and Instruction Manual


Radio: 2-channel with steering servo
Motor: 540 size
Electronic Speed Control: To match selected motor
Battery: 7.4V LiPo or 6.6V LiFe, shorty, saddle or square pack
NOTE, the battery strap must be removed, and battery secured with
double-sided tape if using a saddle or square configuration
Battery Charger: To match selected battery
Pinion Gear: 48 pitch
1/10 scale buggy wheels and tires
Paint, tire glue, charging bag (if using LiPo batteries) building
and track equipment


Wheelbase: 10.91 - 10.98" (277 - 279mm)
Internal Gear Ratio: 2.6:1


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set

jxs 02/09/18

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info