Phoenix Model Waco 50-61cc Gas/EP ARF 90.5"

Tower Stock# LXGWWE  •  Manufacturer Stock# PH173
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Shipping Note:Details
Shipping Note:$59.99 Surcharge
Money Saving Combos
 
LZ1010
 
LZ1007
Notes from our tech department:
This is the Radio Controlled, Gasoline or Electric Powered Almost Ready to Fly
Waco 50-61cc 1/4 scale Biplane from Phoenix Model.
For Intermediate Flyers.

FEATURES

Construction: Balsa and plywood
Wing: Two-piece removable, with aluminum joiner tubes, dual servo
aileron control
Hatch: Removable for access to radio equipment, two painted pilot
figures and cockpit detail
Covering: Covered in high-quality heat shrink film
Cowl: 11.5" (292mm) inside diameter with a slight taper
Landing Gear: Two-piece prebent aluminum with 5.25" (135mm) diameter
main wheels, 1.8" (47mm) tailwheel
Wheel Pants: Fiberglass, painted white and red to match covering
scheme
Spinner: Black plastic scale type, 3.7" (95mm) diameter
Fuel Tank: Approximately 12oz (360cc)
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser.

INCLUDES

Prebuilt Wing, Tail and Fuselage sections, Landing Gear, Wheels,
Spinner, Decals, Hardware and Instruction Manual

REQUIREMENTS

Radio: At least 8-channel
Servos: Five high torque (2-aileron, 2-elevator, 1-rudder)
One standard servo for throttle if using gasoline engine
Building and field equipment
Electric Power;
Brushless Motor: 65cc ElectriFly Rimfire recommended
Electronic Speed Control: If using motor listed above
LiPo Battery: Two 6S
Battery Charger: Compatible with selected battery
Propeller: To match selected motor
Gasoline Power;
Engine: 50-61cc two stroke
Receiver Battery: Two 6.0V, at least 2400mAh
Building and field equipment
Propeller: To match selected engine

SPECIFICATIONS

Wingspan: 90.5" (2300mm)
Length: 73.7" (1873mm)
Wing Area: 2519 sq in (162.5 sq dm)
Wing Loading: 25.20oz/sq in (76.9g/sq dm)
Wing Type: NACA airfoils
Weight: 27.5 - 30lbs (12.5 - 13.5kg)
Wing Tubes;
One each;
0.75 x 38" (19 x 965mm) Wing Tube
0.75 x 35" (19 x 889mm) Wing Tube
Two each;
0.75 x 16.5" (19 x 419mm) Wing Tubes
0.75 x 23" (19 x 584mm) Wing Tubes

Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 6.7" (172mm) back from leading edge of upper
wing
Control Throws- Low High
Ailerons 0.71" (18mm) 10% expo 0.87" (22mm) 10% expo
Elevator 0.71" (18mm) 12% expo 0.87" (22mm) 12% expo
Rudder 1.2" (30mm) 15% expo 1.6" (40mm) 15% expo

COMMENTS

If a replacement fuel tank is required, the 12oz DuBro (DUBQ0212),
tank can be used with the purchase of the Gasoline Conversion Kit
DUBQ0675.
Also, the 12oz Sullivan round tank (SULQ1406) can be used with
their gasoline Conversion Kit, SULQ2684.
Slight modification may be required when installing any aftermarket
fuel tank.

jxs 09/14/17
ir/jxs

Resources
Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info