Associated 1/10 JRT SC10.3 Brushless RTR

Tower Stock# LXGUTP  •  Manufacturer Stock# 7082
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Brushless Electric Powered, 1/10 scale
Ready to Run SC10.3 Short Course Truck with the JRT Body.


Chassis: Molded composite plastic with low center of gravity design
Drive: Rear wheel
Differential: Heavy-duty sealed gear with externally adjustable V2
slipper clutch
Radio: XP120 2.4GHz 2-channel pistol grip with steering and throttle
trim and dual rate, metal-gear, high-torque Reedy digital steering
Motor: Reedy 3300Kv brushless motor
Electronic Speed Control: Water resistant Reedy brushless ESC with
T-plug battery connector and low voltage LiPo cutoff
Shocks: V2 coil-over, aluminum body with anodized blue finish
Wheels: Short course KMC replica, 12mm hex drive, width 1.6" (41mm),
Diameter: 3" (76mm)
Tires: High traction racing compound
Steering: Angled bellcrank "coplanar" design with integral servo
Body: Trimmed and factory finished with JRT Doug Mittag graphics
Suspension: Fully adjustable geometry with steel turnbuckles for
adjustable camber and front toe-in, vertical ball ends for front
and rear roll center adjustments
Caster: Adjustable front and rear, caster/toe-in refers to the angle
of the front when viewed from the side of the car in relation to
the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: Fourteen rubber sealed
Bumpers: Front and rear composite plastic with AE logo rear mud flaps
Warranty: 90 day limited warranty through Team Associated beginning
at date of purchase


RTR SC10.3 Short Course Truck with the JRT Body, Radio System, ESC,
Brushless Motor, Decals and Instruction Manual


Battery: 6-cell sub-C, or 2-cell LiPo battery
Battery Charger: Compatible with selected battery
AA Cells: Four for transmitter
Track and maintenance equipment


Length: 21.65" (550mm)
Width: 11.54" (293mm)
Wheelbase: 12.87" (327mm)
Weight: 4.59lbs (2080g)
Gear Ratio: 2.6:1
Length: 21" (533mm)
Width: 8.8" (224mm) behind front wheels, narrowest point
11.1" (282mm) at rear wheels, widest point
Height: 5.9" (149mm)


Available with the following trim schemes;
Lucas Oil-Carl Renezeder, ASCD7081
Jhonlin Race Team (JRT), Doug Mittag, ASCD7082

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x3/8" Steering Knuckles 2 DTXC1423
2 3/16x3/8" Idler Gear Shaft 1 DTXC1423
2 10x16mm Transmission 1 ASCC9832
4 3/16x3/8" Rear Hubs 2 DTXC1423
2 5/32x5/16" Diff gear 1 DTXC1411

jxs 07/03/17



Product Documents & Files

Manufacturer Contact Information