Axial 1/10 SCX10 II Deadbolt 4WD RTR

Tower Stock# LXGUTM  •  Manufacturer Stock# AX90066
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments ($100.01, $99.99, $99.99) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:


Chassis: Scale steel C-channel side rails with adjustable body mount,
adjustable bumper mounts with swaybar mounting points, mounting
points for optional 2-speed and servo winch, adjustable chassis
mounted servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar
driveshafts with updated design with a larger diameter crosspin
(2x11mm) with an M4 screw shaft (2mm hex drive) for added strength
center splined slider floats between each end with added material
that reduces flex and fatigue
Transmission: AX10 three gear layout, metal motor plate, adjustable
ratio for high speed or competition level crawling speed, 20T
metal drive gear, plastic idler and lower gear, optional all metal
gear set is available, AX31585, better mounting points at base of
transmission-no more stripped screws
Slipper Clutch: Dual pad design for added surface area, 32P gear
pitch for high-torque applications
Motor: 35 turn, brush equipped, water resistant, integrated cooling
Radio: Tactic TTX200 2-channel transmitter with TR325 3-ch Receiver,
Steering Servo: Tactic TSX45 metal gear, water resistant, 151ozin
torque rating, dual ball bearings
Receiver Box: Waterproof with separate silicone seals for antenna,
servo wires and gasket for receiver box cover, receiver box
located on side plates for easy access and low center of gravity
ESC: AE-5 waterproof, switchable between LiPo or NiMH
operation with a simple jumper-jumper 1 provides simple plug and
play choice between LiPo or NiMH, jumper 2 switches Drag Brake
settings, waterproof design with Star plug battery connector,
Spur Gear: 56T 32-pitch, plastic construction
Pinion Gear 15T 32-pitch, steel construction
Battery Tray: Easy access front mount, adjustable, accomodates
batteries up to 1.2 x 1.7 x 5.8 (32x44x147mm) 3S, 5000mAh
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized gear
ratio for reduced torque twist, optional gearing choices, one-
piece axle housing, increased clearance, larger load rated
bearings for durability, 8 kingpin axle eliminates tire scrub,
single piece axle housing, one-piece all metal locker, 10
increment adjustments for knuckle carriers and straight axle
adapters, optimized gear ratio 3.75 compared to 2.92 previously,
for less torque twist
Body: Trimmed and painted olive in color, dashboard, driver figure
plastic rollbar cage with light bar (lights not included)
Wheels: Method Hole wheels, molded composite 1.02 (26mm) wide,
2.12 (53.9mm) construction, black in color, 12mm hex
Tires: 1.9 Nitto Trail Grappler MT, S30 compound with large blocks
for excellent bite in all terrain 4.7 (119.4mm) 1.9 (48.2mm)
Shocks: Coil over, oil filled, steel springs, white in color,
multiple mounting positions
Suspension: Optimized suspension geometry with integrated mounts
upper and lower aluminum links, 4-link design reduces axle steer
and torque twist, and guards against suspension wrap-up in high-
power applications, all steel links
Steering: Proper CMS geometry using 3-link setup with panhard bar,
45 steering angle
Front Bumper: Rigid plastic
Warranty: One year bumper to bumper limited. Axials warranty center
Hobby Services will repair or replace any incorrectly made part.
Proof of purchase is required for Axial to honor any warranty
claim. Axial reserves the right to change or modify this warranty
without notice. This warranty does not cover damages due to normal
wear and tear, users failure to perform routine maintenance, user
error of assembly or installation, modifications, misuse, crash
damage, or the addition of aftermarket parts or optional parts.
Note: Purchasing products from unauthorized retailers may void the
warranty and prevent support and service.
Repair or replacement of the product by Hobby Services is the sole
and exclusive remedy for any loss or damages.


RTR SCX10 II Deadbolt 4WD with Oil-Filled Shocks, Wheels, Tires,
Painted Body, Radio, ESC, Motor, Decals, Waterproof Receiver Box,
Light Bar (lights not included) and Instruction Manual


Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Compatible with selected battery
Building and track equipment


Length: 18.1 (460mm)
Width: 8.8 (225mm)
Height: 9.0 (229mm)
Wheelbase: 12.0 (305mm), optional link kit allows wheelbase
adjustment to either a 11.4 12.0 or 12.3 wheelbase
Ground Clearance: 2.7 (68mm)
Weight: 4.65lbs (2.1kg) approximately, with electronics
Optimized Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 42.00, stock
(33.69-54.15 with different spurpinion gear combinations, extra
spur and pinion gears must be purchased separately)
Adjustable Battery Tray Dimensions: 5.75 x 1.2 (147 x 32mm)
Length: 17.5 (444mm)
Width: 6.25 (159mm)
Height: 6.4 (162mm) bottom of body to top of roll cage
3.3 (84mm) bottom of body to top of drivers door


For Replacement Ball Bearings use:
Qty. Size Location Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion gear 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
1 5x11x4mm Spur Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Top Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535

jxs 041918



Product Documents & Files

Manufacturer Contact Information