HPI Racing 1/5 Baja Kraken TSK-b Class 1 Gas RTR

Tower Stock# LXGTEK  •  Manufacturer Stock# 115485
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Gasoline Powered Ready to Run
1/5 scale HPI Baja 5B TSK-b Class 1 Buggy.
with the Kraken RC Sidewinder X5 Conversion
that adds a polymer roll cage and polycarbonate body panels.


Chassis: 0.16" (4mm) pressed aluminum channel monocoque design
with modular polymer roll cage
Drive: Two wheel, steel dogbones with rubber boots, super heavy duty
driveshafts, one-piece rear hub for increased durability
Differential: Metal gear
Engine: HPI Fuelie K26 2-stroke gasoline engine with pull starter
and foam air filter
Muffler: High-flow tuned
Clutch: 8,000 RPM high-performance
Fuel Tank: 24oz (700cc)
Radio: 3-ch HPI TF-45 2.4GHz FHSS radio system with failsafe, SF-20W
throttle servo, dual rate steering, servo end point adjustment
Steering Servo: SFL-11MG metal gear servo 347 in/oz torque @ 6V,
speed 0.17 seconds/60
Body: Pre-painted custom polycarbonate body panels
Suspension: Captured hinge pins for easy adjustment
Shocks: Big Bore valve variable control with 6mm diameter shafts
Receiver Pack: 6V 3000mAh NiMH with wall charger and Tamiya
Ball Bearings: Full set
Wheels: Front 4.7 x 2.4" (119 x 61mm), rear 4.7 x 3" (119 x 76mm)
with beadlock mounting system
Tires: HB Rodeo SC with foam inserts


Baja 5B TSK-b Class 1 Buggy w/Kraken RC Sidewinder X5 Conversion
K26 Gasoline Engine, Shock and Diff Oil, 2.4GHz 3-ch Radio,
Steering & Throttle Servos, 100cc bottle of 2-Stroke Oil, RX
Battery, Wall Charger four AA Batteries,
Instruction Manual and Decal Sheet


AA Batteries: Four for transmitter
Fuel: Pre-mixed gasoline and 2-cycle oil, 25:1 ratio
Track and maintenance equipment


Length: 32.2" (818mm)
Width: 18.9" (480mm)
Height: 10" (254mm)
Wheelbase: 22.5" (571mm)
Ground Clearance: 2.4" (61mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10x4mm Steering 2 DTXC1535
4 12x24x6mm Front Hubs 2 HPIC0089
4 12x24x6mm Rear Hubs 2 HPIC0089
2 12x24x6mm Drive Gear 1 HPIC0089
2 17x30x7mm Idler Gear 1 HPIC0092
2 12x24x6mm Spur Gear Mount 1 HPIC0089
2 20x32x7mm Transmission 1 HPIC1094
4 10x15x4mm Transmission 2 DTXC1595

jxs 04/27/17

Easy RC: Cars & Trucks
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info