Tekno RC 1/8 EB48.4 Competition Buggy 4WD Kit

Tower Stock# LXGMHU  •  Manufacturer Stock# TKR8000
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Easy Pay
Request 2 Payments ($209.98, $209.97) Details
Notes from our tech department:
This is the 18 scale Electric Powered, Radio Controlled
EB48.4 Competition Buggy Kit.


Chassis: 7075 aluminum 0.16 (4mm) thick
Drive: Four wheel, front and rear universal driveshafts, tapered
aluminum center driveshaft
Differentials: Three fluid filled adjustable
Shocks: Oil-filled with CNC machined aluminum bleeder shock caps
that can be used to build vented or non-vented shocks (optional
bladders required for non-vented shocks), 4mm steel shafts,
CNC 41.9 FlatFlat Delrin Pistons, and CNC Delrin Guides, new low
frequency shock springs, tall clamping spring perches with
captured shock boots
Steering: Revised geometry and Ackermann plate, response and
durability improved with new bearing supported spindles and spindle
carriers, reduced wheel offset for better performance in corners
adjustable Ackermann and bump-steer, Ackermann refers to the effect
of the inner front wheel rotating faster that the outer front wheel
during turns, optional solid right bell crank for increased
Body: Clear polycarbonate, fighter jet inspired with more internal
clearance, small rear spoilers increase downforce, with with
adjustable low center of gravity lightweight mount
Suspension: Revised wide rear pivot suspension geometry
Motor Mount: 2-piece CNC aluminum with dual clamping gear mesh
adjustment, direct-to-diff mounting
Caster: Adjustable, castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind


EB48.4 Competition Buggy Kit with Clear Body, Shocks, Decals, Window
Mask Sheet, Rear Wing, Shock and Diff Oil, Instruction Manual


Radio: 2-channel with high-torque steering servo
Motor and ESC System: For 18 scale buggy
Tires and Wheels: For 18 scale buggy
Pinion Gear: MOD1 15-25 tooth pinion (TKR4175-TKR4185)
LiPo Battery: 4-6S (4S at least 5000mAh)
Battery Charger, Charging Bag, Paint, CA Glue, tools, building and
track equipment


Length: 17.1 (435mm) without wing
Width: 12 - 12.2* (306-310mm*) *optional hubs required
Weight: 7.0lbs (3200g)
Internal Gear Ratio: 3.33:1
Diff Ratio: FR - 1240t, center 44t
Battery Tray Dimensions: 1.97x5.8 (50x148mm) 2x2s or 1x4s config
Length: 13.3 (338mm)
Width: 5 (127mm)
Height: 3.5 (89mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 5x11mm Front Gearbox 1 DTXC1547
2 5x13mm Rear Gearbox 1 ARZC1023
2 8x16mm Front Hubs 1 DTXC1585
2 13x19mm Front Hubs 1 TKRC3194
2 8x16mm Rear Hubs 1 DTXC1585
2 13x19mm Rear Hubs 1 TKRC3194
2 6x10mm Steering 1 DTXC1561
4 5x8mm Steering 2 DTXC1523

jxs 122016



Product Documents & Files

Manufacturer Contact Information