RC4WD Bully II MOA Competition Crawler Kit

Tower Stock# LXGDSN  •  Manufacturer Stock# Z-K0056
Notes from our tech department:
This is the Electric Powered, Radio Controlled.
RC4WD Bully II MOA (Motor on Axle) Competition Crawler Kit


Chassis: Carbon fiber and delrin high clearance design
Drive: Four wheel with CNC machined aluminum axles
Axles: Bully 2 Competition Crawler, billet aluminum case with
hardened steel gears, full ball bearings, XVDs, clockable Cs,
40.7:1 radio
Rocker Dig: Rocker Dig II version with much stronger brake
Suspension: 4 link front and rear, solid titanium links
Shocks: Internal spring 90mm aluminum body-can be oil-filled
Wheels: Type 2.2 carbon fiber and delrin lightweight competition
beadlock wheels 0.99 (25.3mm) wide, 0.59 (15mm) back spacing
Tires: Bully 2.2 competition tires, advanced X2SS compound
Body Panels: Clear Lexan
Pinion Gear: 32 pitch 14 tooth
Warranty: 30 day limited through RC4WD beginning at date of purchase.
Does not cover normal wear and tear, or the consequences caused by
wrong assembly, modification, lack of routine maintenance, or the
use of aftermarket parts
Optional Rocker Dig II RC4C2028 can be purchased seperately to
allow independent motor control for optimum power and function.


Assembled Bully II MOA Competition Crawler,
Tires, Wheels, Shocks, Body Panels, Instruction
Manual and Decal Sheet

REQUIRES Motors: Two brush equipped crawler type, approximately 35T
Radio: 4-channel recommended with 3 position switch for DIG switch
Steering Servo: High torque at least 153oz 6V
ESC: Such as the RC4WD Outcry brushed speed controller
Battery: 2S shorty LiPo
Battery Charger: Compatible with selected battery
Charging Bag if using LiPo batteries
Lexan safe paint for body panels
Building and track equipment


Wheelbase: 12.5 (317mm)
Width: 10 (254mm)
Height: 7.2 (182mm)
Ground Clearance: 3.6 (92mm)
Final Drive Ratio: 40.7:1
Weight: 4.38lbs (1.99Kg)

jxs 080516



Product Documents & Files

Manufacturer Contact Information