Kyosho 1/10 Fazer 1970 Dodge Charger 4WD RTR

Tower Stock# LXFSJR  •  Manufacturer Stock# 34052T2B
  • front/side (see larger view)
  • rear/side (see larger view)
  • out of package (see larger view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Kyosho Electric Powered, 2.4GHz Radio Controlled, 1/10 scale
Ready to Run Pure Ten EP Fazer RS VEi
with the 1970 Dodge Charger Body.


Chassis: Composite plastic bathtub type, compatible with 200mm bodies
Drive: Four wheel
Radio: Kyosho Synchro KT-231P transmitter with KS4081-04W high-
torque waterproof steering servo
Motor: Orion dDrive 2700kV brushless with integrated ESC, one button
adjustment, heat protection and low battery power protection
Battery: Team Orion 1800mAh NiMH battery with T-plug
Battery Charger: AC powered
Differential: Sealed
Suspension: Fixed length arms eliminate the need for camber, caster
and toe-in adjustments
Body: Painted and trimmed 1970 Dodge Challenger
Front Bumper: Foam construction
Tires: On-road 2.7" (68.5mm) diameter, 1.02" (26mm) wide, extra set
of hard plastic drift tires included
Wheels: Premounted 5-spoke with chrome finish, also 6-spoke with
matte black finish, 12mm hex
Ball Bearings: Full set included
Shocks: Oil-filled
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle


Pure Ten EP Fazer Touring Car with Body, Tires, Wheels, Motor, ESC
Radio, Battery, Battery Charger, set of Drift Tires and Instruction


AA Batteries: Four for transmitter
Track equipment


Length: 19.1" (486mm)
Width: 7.9" (200mm)
Ground Clearance: 0.39" (10mm) approximately
Wheelbase: 10.8" (274mm)
Front and Rear Tread: 6.8" (174mm) distance between wheel centers,
Gear Ratio: 6.34:1
Weight: 3.3lbs (1500g)
Length: 20" (508mm)
Width: 8.3" (211mm) at rear wheels, widest point
Height: 4.5" (114mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 12x18mm Front Differential 1 DTXC1597
2 12x18mm Rear Differential 1 DTXC1597
2 5x10mm Gear Shaft 1 DTXC1535
1 10x15mm Gear Shaft 1 DTXC1595
2 5x10mm Center Unit 1 DTXC1535
4 5x10mm Front Uprights 1 DTXC1535
4 5x10mm Front Uprights 1 DTXC1535

jxs 09/25/15

See Tower Catalog page 93.
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info