Mugen Seiki 1/8 MBX-7 Eco M-Spec Kit

Tower Stock# LXDVGV  •  Manufacturer Stock# E2010
Mugen Seiki 1/8 MBX-7 Eco M-Spec Kit (large view)
Notes from our tech department:
This is the electric powered, radio controlled, 1/8 scale
Mugen MBX7-ECO M-Spec Off Road Buggy Kit.


Chassis: A7075 T6 aluminum 0.12" (3mm) thick
Drive: Four wheel three differential shaft drive
Shocks: Four oil filled
Shock Towers: Front, 0.20" (5mm) thick 7075 aluminum
Rear, 0.16" (4mm) thick 7075 aluminum
Gearbox: Sealed, front and rear
Differentials: Planetary geared
Motor Mount: Two piece
Transmission: Single-speed
Ball Bearings: Full set
Battery Tray: Designed for two 2 cell LiPo batteries or a single 4
cell LiPo battery
Suspension: Pillow ball type with 0.20" (5mm) aluminum lower
suspension mounts for optimized geometry
Body: Clear buggy type, cab forward design with raised sides for
increased rear traction
Spur Gear: 44 Tooth plastic
Pinion Gear: 14T steel
Camber Tie Rods: Adjustable, Camber describes the angle at which the
tires sit vertically
Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which
the tires point inward as viewed from above
Steering: Bell-crank type, with carbon graphite steering brace and
adjustable Ackerman. Ackerman describes the effect of the inside
front wheel turning faster than the outside front wheel during


Mugen MBX7-ECO M-Spec Off Road Buggy Kit with clear buggy body,
rear wing, decal sheet, window mask sheet, battery/ESC tray, spur
and pinion gears, and illustrated instrucion manual


Motor: 1/8 scale brushless motor
ESC: 1/8 scale brushless motor compatible ESC
Radio: 2-channel with high-torque servo for steering
Tires, Foam Inserts, and Wheels: 1/8 scale buggy
Building and track equipment


Specs such as dimensions, weight, and wheelbase were not provided by
manufacturer at the time of this writing
Length: 13" (330mm)
Width: 7.9" (200mm)
Height: 3.6" (92mm)


For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
6 8x16mm Fr/R/Center Diffs 3 DTXC1585
4 8x16mm Fr/R Gear Cases 2 DTXC1585
2 8x16mm Front Hubs 1 DTXC1585
2 15x21mm Front Hubs 1 ASCC6862
2 8x16mm Rear Hubs 1 DTXC1585
2 15x21mm Rear Hubs 1 ASCC6862

jxs 08/16/13

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info