Tamiya 1/10 Ferrari F2012 Kit

Tower Stock# LXDEJZ  •  Manufacturer Stock# 58559
Tamiya 1/10 Ferrari F2012 Kit (large view)
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 1/10 scale, electric powered, radio controlled
Ferrari F2012 Racing Car kit from Tamiya.


Chassis: FRP construction F104W double deck with 0.08" (2mm) upper,
and 0.12" (3.2mm) lower deck
Drive: Two wheel direct with solid axle stainless steel rear shaft
Differential: Ball pressure plate type with resin housing
Motor: 540 size brushed
Ball Bearings: Full set
Body: Clear, polycarbonate with front and rear wings in white plastic
Steering: Two-piece tie-rods, Isometric steering rod links with
longitudinally mounted steering servo position
Suspension: Front, kingpin coil with spacers for ground clearance
adjustment, Rear, T-bar with carbon friction plate and friction
Tires: Rubber racing slicks, Front; 2.4" (62mm) diameter, 1.2" (30mm)
wide, Rear; 2.4" (62mm) diameter, 1.2" (32mm) wide, both have foam
Wheels: Gray plastic, Front: 1.8" (45mm) diameter, 1.2" (30mm)
wide, Rear: 1.8" (45mm) diameter, 1.4" (35mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the top of tires
from vertical when viewed from front or behind vehicle
Spur Gear: Plastic, 63 tooth, 06 module
Pinion Gear: 14 tooth metal


Tamiya Ferrari F2012 Racing Car kit, clear body, front and rear wings
decals, wheels, tires, motor and instructions


Radio: 2-channel, small ESC and receiver recommended, standard servo
Radio Batteries: Eight AA
Battery: 6-cell stick pack with Tamiya type connector
Battery Charger: Peak type recommended
Building and track equipment


Length: 16.6" (422mm)
Width: 7.8" (200mm)
Height: 3.9" (100mm)
Weight: 24oz (680g)
Length: 14" (356mm)
Width: 5.5" (140mm) at widest point
Height: 4" (102mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Rear Shaft 1 DTXC1561
2 8x12mm Ball Diff 1 DTXC1581
1 5x11mm Diff Housing 1 DTXC1547
4 5x10mm Front Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535

jxs 03/21/13

See Tower Catalog page 107.
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info