Axial 1/8 Yeti XL Monster Buggy 4WD RTR

Tower Stock# LXAABE  •  Manufacturer Stock# AX90032
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Money Saving Combos
 
L7AABE
Notes from our tech department:
This is the Electric Powered, 2.4GHz Radio Controlled, 1/8 scale
Ready to Run Yeti XL Monster Buggy from Axial.

FEATURES

Chassis: Composite plastic with integrated upper and lower aluminum
braces for greater stiffness, multiple upper link positions to
adjust anti-squat
Drive: Four wheel shaft, AR60XL solid rear axle, WB XL CVJ rear
driveshaft with captured cross pin design-no set screws to lose
Brushless Motor: Castle Creations 2200Kv, 4-pole
Receiver Box: Waterproof, integrated into bottom of chassis
Battery Trays: Two, easily accessible from sides of chassis
Radio: Tactic TTX300 2.4GHz FHSS spread spectrum 3-channel pistol
grip with steering rate, and steering and throttle end point
adjustments
Steering Servo: Tactic TSX45 metal gear, high-torque, water resistant
Electronic Speed Control: Vanguard AE-4 XL 6S/4S LiPo compatible
can be programmed manually via Castle Field Programming Card or the
or through the Castle Link software interface (optional)
Shocks: Oil-filled 16mm Big Bore, 20mm aluminum bodies, 4mm shafts
Transmission: All metal gears, single speed, full ball bearing
equipped
Differentials: CNC cut metal gears
Steering: Dual shear rack
Suspension: Front, independent, rear 4-link
Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm)
diameter
Tires: BF Goodrich Krawler T/A KX 2.9 x 7.25" (74 x 184mm)
Body: Trimmed and painted, polycarbonate interior tray with molded
driver and passenger figures, dashboard and center console detail
Warranty: One year bumper to bumper limited. Axial's warranty center
Hobby Services will repair or replace any incorrectly made part.
Proof of purchase is required for Axial to honor any warranty
claim. Axial reserves the right to change or modify this warranty
without notice. This warranty does not cover damages due to normal
wear and tear, users' failure to perform routine maintenance, user
error of assembly or installation, modifications, misuse, crash
damage, or the addition of aftermarket parts or optional parts.
Note: Purchasing products from unauthorized retailers may void the
warranty and prevent support and service.
Repair or replacement of the product by Hobby Services is the sole
and exclusive remedy for any loss or damages.

INCLUDES

RTR Yeti XL Monster Buggy with Radio System, ESC, Motor, Body,
4-Way Wrench and Instruction Manual

REQUIREMENTS

Batteries: Two 2S or 3S LiPo Packs with Dean's Ultra connector, 25C
minimum discharge rating
Battery Charger: To match selected batteries
AA Batteries: Four for transmitter
LiPo charge bag, maintenance and trail equipment

SPECIFICATIONS

Vehicle;
Length: 25.75" (654mm)
Width: 16.3" (414mm)
Height: 11.10" (282mm)
Wheelbase: 18.5" (470mm)
Ground Clearance: 2.48" (63mm)
Weight: 12.75" (5.78kg)
Body;
Length: 23.5" (597mm)
Width: 9.7" (247mm)
Height: 6.8" (173mm)
Thickness: .040" (1.02mm)
Battery Tray Dimensions;
Length: 6.89in(175mm)
Height: 1.3in (33mm)
Width: 1.7in (43mm)
Battery Tray Size: 175mm(L)x48mm(W)x30mm(H)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x16mm Front Diff 1 ASCC9832
2 10x16mm Rear Diff 1 ASCC9832
2 15x21mm Front Uprights 1 DTXC1601
2 8x16mm Front Uprights 1 DTXC1585
2 15x21mm Front Bulkhead 1 DTXC1601
2 15x21mm Rear Bulkhead 1 DTXC1601
2 8x16mm Rear Axle 1 DTXC1585
2 5x11mm Transmission 1 DTXC1547
2 8x16mm Transmission 1 DTXC1585

jxs 10/08/14
ir/jxs

Resources
Easy RC: Cars & Trucks
Industry Review #1
Industry Review #2
Industry Review #3
Industry Review #4
Industry Review #5
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info