HoBao Racing 1/8 Hyper 7 TQ Nitro RTR Blue

Tower Stock# LWB365  •  Manufacturer Stock# HB-M7TQ-C28BU
Easy Pay
Request 3 Payments ($106.68, $106.66, $106.66) Details
Notes from our tech department:
This is the HoBao Glow Powered, Radio Controlled, 18 scale,
Ready to Run Hyper 7 TQ Sport Buggy with Blue Body.

FEATURES

Chassis: Aluminum 0.14 (3.5mm), gun metal gray in color, separate
plastic side guards
Drive: Four wheel shaft
Engine: Hobao Mac Star 28 with slide valve carb, Hobao T4 turbo
platinum glow plug, and large plastic pull-start handle
Exhaust: Aluminum tuned pipe with polished natural finish
Radio: HoBao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering
and throttle, charge jack on transmitter for optional NiCd
batteries, high output digital steering and throttle servos
Servos: HoBao HB 5514 waterproof, metal gear, ball bearing equipped
digital servos, 194oz-in (14kg-cm) torque
Suspension: Front and rear lower composite suspension arms, front and
rear stabilizer bars
Shocks: Aluminum body 14mm oil-filled
Front Shock Tower: 0.16 (4mm) thick aluminum
Rear Shock Tower: 0.12 (3mm) thick aluminum
Fuel Tank: 4.2oz (125cc)
Clutch: Three shoe composite, 13 tooth steel clutch bell
Spur Gear: 46 tooth steel
Tires: High grip racing with foam inserts
Wheels: Revo style, black in color, 17mm hex
Body: Trimmed and printed with blue, yellow, red and white color
scheme
Brake: Dual disc
Caster: Adjustable, castertoe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

RTR Hyper 7 TQ Buggy with .28 cu in (4.6cc) Engine, 3-ch Radio,
Steering and Throttle Servos, black plastic Rear Wing, Decal Sheet
printed Body, Air Filter and Instruction Manual

REQUIREMENTS

AA Batteries: Twelve, 8 for radio, 4 for receiver
Nitro Fuel: Car blend with 15-30 nitro content, 30 required for
engine break-in
Track and maintenance equipment

SPECIFICATIONS

Vehicle
Length: 19.5 (495mm)
Width: 12 (305mm)
Height: 7.5 (190mm)
Wheelbase: 12.7 (322mm)
Weight: 7.71lbs (3500g)

Body
Length: 13.75 (349mm)
Width: 8.6 (218mm)
Height: 3.8 (96mm)

Carburetor Needle Settings
Factory Default After Break-In
Top End (high speed): 2-12 turns out 2-2-14 turns out
Bottom End (low speed) 12 turn out flush wball collar
Mid Range: Flush-do not touch Flush-do not touch
Idle Screw 1mm (116 ) 1mm (116 )

COMMENTS

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Ctr Diff 1 DTXC1585
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Fr Gearbox 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 8x16mm Steering Knuckles 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
4 8x16mm Rear Hubs 2 DTXC1585
2 5x10mm Clutch 1 DTXC1535

jxs 102116
irjxs

Resources

References

Product Documents & Files

Manufacturer Contact Information