Master Airscrew 11x8 3-Blade G/F Nylon Propeller

Tower Stock# MASQ1910  •  Manufacturer Stock# 3B11X80N01
Shipping Restricted ItemDetails
Notes from our tech department:
Master Airscrew Injection Molded Fiberglass Filled Nylon Propellers and
Excellent for any Type of Application, from Training and
Sport Flying to Serious Competition.


Factory Balanced 3-Bladed Props have NACA airfoils and hold a
true pitch.
They have been accurately balanced and create a greater thrust
at a lower RPM.
This particular prop is glass-filled nylon as opposed to a wooden


One 11x8 glass-filled nylon 3-bladed propeller


Diameter: 11
Pitch: 8


The general rule for converting a 2 blade prop to a 3 blade is
subtract 1 from Diameter OR subtract 1 from the Pitch.
PER MASTER AIRSCREW: All 3- and 4- blades props are balanced
dynamically at the factory prior to drilling. The mounting holes
are then drilled slightly off center, if required, to properly
balance the propeller. As such, your mounting hole may be slightly
off center. Master Airscrew assures us this is perfectly normal
and will not cause any problems during usage.


Manufacturer Contact Information