Redcat Racing 1/8 TR-MT8E BE6S Brushless 4WD RTR

Tower Stock# RERC1135  •  Manufacturer Stock# TR-MT8E-BE6S
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Easy Pay
Request 2 Payments ($300.00, $299.99) Details
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Brushless Electric Powered, 18 scale
Ready to Run TR-MT8E BE6S Monster Truck from Redcat Racing.


Chassis: Plastic bathtub type, black in color with wheelie bar
Drive: Four wheel shaft, with hardened steel driveshafts
Transmission: Forward and reverse, anodized aluminum case
Differentials: Gear type, front, center and rear
Radio: R-X1 2.4GHz with steering and throttle EPA
Steering Servo: Savox SW-0231 digital, 208 oz-in torque
Brushless Motor: 2200Kv 0.197 (5mm) shaft
ESC: 150A, Max 8 waterproof 4S LiPo compatible with 3000Kv motor,
6S LiPo compatible with 2400Kv motor, cooling fan & 6V7.4V 6A
switch mode BEC, two T-connectors for batteries
Suspension: Front and rear adjustable pillow ball
Shocks: Big Bore oil-filled
Shock Towers: Aluminum 0.197 (5mm) thick
Body: Polycarbonate, painted and trimmed with decals applied
black plastic rear wing with aluminum uprights
Lights: Four LED, built into front bumper
Pinion Gear: M1.0 14 tooth steel
Wheels: 5-spoke black plastic 18 scale monster truck
Tires: Rubber, off-road, 7.1 (180mm) outer diameter
Ball Bearings: Full set included
Caster: Adjustable castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RTR TR-MT8E BE6S Monster Truck with Brushless Motor, 2.4GHz
Radio, ESC, Steering Servo, Painted Body, Wheel Nut Wrench and
Instruction Manual


AA Batteries: Four for transmitter
Battery: Two 2S-4S LiPo or two NiMH batteries up to 12 cells with
Battery Charger: For selected battery type
Charging Bag if using LiPo batteries
Track and maintenance equipment


Length: 22 (560mm)
Width: 17.3 (440mm)
Height: 10.2 (260mm)
Wheelbase: 13.8 (350mm)
Ground Clearance: 3.5 (88mm)
Track: 17.3 (440mm) distance from outer edges of tires measured
Battery Box Dimensions: 1.8 x 6.2 x 1.1 (47 x 159 x 27mm)
Length: 18.1 (461mm)
Width: 8.7 (222mm)
Height: 4.7 (120mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Rear Uprights 2 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
1 8x16mm Transmission 1 DTXC1585
1 5x10mm Transmssion 1 DTXC1535

jxs 010517



Product Documents & Files

Manufacturer Contact Information