Redcat Racing 1/5 Rampage XT Gas Truck 4WD RTR Red

Tower Stock# RERC1110  •  Manufacturer Stock# RAMPAGE-XT-RED
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Easy Pay
Request 3 Payments ($210.01, $209.99, $209.99) Details
Notes from our tech department:
This is the Gasoline Powered, 2.4GHz Radio Controlled, 15 scale
Ready to Run Rampage XT Monster Truck in Red from Redcat Racing.


Chassis: 6061T6 aluminum 0.157 (4mm) thick
Drive: Four wheel shaft drive
Transmission: Single speed
Engine: 30cc 2-stroke gasoline with pull starter, protective roll
cage installed over engine
Exhaust System: Dual outlet tuned aluminum exhaust pipe with polished
natural finish
Radio: 2.4GHz RCR-2C with dual rate steering, throttle & steering
trim and reverse
Steering Servo: 2030kg-cm torque
Receiver Battery: 6V 2500mAh
Shocks: Aluminum body oil filled
Shock Towers: 0.24 (6mm) thick
Fuel Tank: 16.9oz (500cc)
Body: Trimmed and painted with red and silver color scheme
Front Bumper: Plastic
Brake: Dual disc
Tires: Off road knobby with foam inserts
Wheels: Six spoke (spokes are in groups of two) matte black in color
7.1 (180mm) diameter, 4.3 (110mm) wide
Suspension: Front and rear anti sway bars
Caster: Adjustable, castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind


RTR Rampage XT Truck with 30cc Gasoline Engine, 2.4GHz Radio
System, Fail Safe, Painted Body, 6V Receiver Battery, Decals and


Gasoline: 90-93 octane unleaded
Two-Stroke Oil: Break-in mixture 20:1, 20 part gasoline1 part oil
Running mixture 30:1, 30 part gasoline1 part oil
Track and maintenance equipment


Length: 29.5 (750mm)
Width: 21.1 (540mm)
Height 12.6 (320mm)
Wheelbase: 19.7 (500mm)
Ground Clearance: 1.6 (40mm)
Dry Weight: 23.1lbs (10.5kg)
Gear Ratio: 1:9.6
Length: 28.3 (719mm)
Width: 8.6 (218mm)
Height: 8 (203mm)


For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x19mm Ctr Diff Gear 2
4 10x19mm Fr. Uprights 4
4 10x19mm Rear Uprights 4
2 10x19mm Front Diff 2
2 10x19mm Rear Diff 2
1 10x22mm Drive Pinion

jxs 081516



Product Documents & Files

Industry Reviews

Manufacturer Contact Information