Tower Hobbies Uproar 40 GP Airplane Kit .32-.40,48"

Tower Stock# LXJA52  •  Manufacturer Stock# TOWA2020
Money Saving Combos
Notes from our tech department:
Get a great Fun-fly model with a great price in the Tower Hobbies Uproar 40
model airplane kit.


Die-cut plywood and balsa wood for construction, pushrods, canopy,
control horns and miscellaneous hardware.


.32-.40 2 stroke or .40-.48 4 stroke engine, 4 channel radio with 5
servos (2 servos run the ailerons), a Y-harness, 2 rolls of covering,
miscellaneous hardware (see primary required items in the ACG),
& miscellaneous building & field equipment. Also requires a
2" to 2" spinner or a prop nut.


Wing span: 48" Wing area: 578 sq in Length: 42"
Wing loading: 14-16 oz sq ft Weight: 3.5-4lbs
Center of Gravity: 3" (76.2mm) back from the wing leading edge


There are NO DECALS included. See "Notes" below.
The wing is Glued to the fuselage (not bolted)
Made of all wood
Semi-symmetrical wing
kpm 8/31/95
Control Throws: High Rate Low Rate
Elevator " up 3/8" up
" down 3/8" down
Rudder 1" right Same as high rates
1" left
Ailerons: " up 3/8" up
" down 3/8" down

NOTES: Replacement parts are available through Great Planes.
Please see the parts listing on the web page for this kit
here at for full parts listing and parts
purchasing information.
The Purple Tower Hobbies arrow logo decal that is in the kit can
be obtained through GP Manufacturing (DECAL013).

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info