Associated 1/8 RC8T3.1 Nitro Team Truck 4WD Kit

Tower Stock# LXHAPK  •  Manufacturer Stock# 80937
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
Coupon discount not allowed by manufacturer for this product
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Glow Powered, 1/8 scale
Off-Road RC8T3.1 Competition Truggy Kit from Team Associated.


Chassis: 0.12" (3mm) thick 7075-T6 hard-anodized aluminum, with
keyed lower suspension plates
Drive: Four wheel shaft, 5.2" (133mm) CVA driveshafts for increased
traction and chassis support
Differentials: New V3 with H.T.C. (High Torque Capacity) internal
gears with increased fluid capacity and more consistent feel
straight-cut bevel gears for great acceleration and run time
Gearboxes: Updated design reduces differential movement for more
consistent gear mesh
Body: Pre-painted and trimmed Pro-Line Predator
Shocks: 6061 aluminum bodied 16mm Big Bore with bleeder style caps
0.79" (20mm) inner diameter shock springs
Shock Towers: 7076-T6 aluminum, 0.197" (5mm) thick front tower,
0.157" (4mm) thick rear tower
Suspension: Race spec suspension arms, with arm pivots revised for
more ground clearance for better jumps and landings and greater
Steering: +2mm steering block arms for smooth and precise action
Engine Mount: Two-piece aluminum, sliding design for easy gear mesh
adjustment and engine removal
Brake: Bonded pads and machined steel rotors
Clutch: New 4 shoe
Spur Gear: 46 tooth
Fuel Tank: Molded plastic construction with splash guard
Ball Bearings: Full set, Factory Team rubber sealed


RC8T3 Truggy Kit with Clear Body, Fuel Tank, Shocks, Decals
Shock Oil, Diff Oil, Air Filter and Instruction Manual


Radio: 2-channel with high torque steering servo
Engine: .21-.28 cu in rear exhaust
Exhaust System: Tuned pipe and header
Receiver Pack: 4.8 - 7.4V flat, LiPo, LiFe or NiMH
Wheels: 1/8 scale truggy
Tires: 1/8 scale truggy
Fuel: Model car blend, 30% nitro recommended
Polycarbonate safe spray or brush-on paint, body reamer
Glow starter, fuel bottle, starter box, tools and track equipment


Length: 22.05" (560mm)
Width: Varies
Weight: Varies
Wheelbase: 14.82" (376.5mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16mm Fr Diff 1 DTXC1585
2 8x16mm Ctr Diff 1 DTXC1585
2 8x16mm R Diff 1 DTXC1585
4 6x10mm Steering 2 DTXC1561
4 5x8mm Steering 2 DTXC1523
2 6x12mm Fr Gearbox 1 DTXC1569
2 6x12mm Rear Gearbox 1 DTXC1569
4 8x16mm flanged Fr Uprights 2 ASCC1565
4 8x16mm flanged R Uprights 2 ASCC1565
2 5x10mm Clutch 1 DTXC1535

jxs 02/26/18

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info