Tower Hobbies Slow Ride 3D EP ARF 63.5"

Tower Stock# LXHAGP  •  Manufacturer Stock# TOWA2042
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Money Saving Combos
 
LZ0018
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric Powered, Almost Ready to Fly
Tower Hobbies SlowRide EP 3D Airplane.
**Designed and Developed for High Level Super Slow 3D Manuevers**

FEATURES

Construction: Lightweight, built-up wood, large removable hatch for
easy battery changes, large control surfaces and short, direct
linkages for high degree of control
Wing: One-piece, ultra-low wing loading, removable side force
generators provide stability during super slow flight while
enhancing control for knife-edge maneuvers
Covering: High quality heat shrink covering
Control Surfaces: Double beveled to allow for maximum deflection and
control, fully deflected ailerons and tail surfaces, short direct
control linkages, self aligning tail surfaces
Landing Gear: Prebent wire with foam wheels and steerable tailwheel
Warranty: Horizon Hobby LLC (Horizon) guarantees this kit to be free
from defects in both material and workmanship at the date of
purchase. This warranty does not cover any component parts
damaged by use or modification.

INCLUDES

Pre-built Wing, Fuselage and Tail Sections, Landing Gear
and Instruction Manual

REQUIREMENTS

Radio: At least 5-channel with mixing capabilities
Servos: Four mini w/at least 84 oz-in (6.04 kg-cm) torque
Brushless Motor: Great Planes RimFire .28 brushless outrunner
recommended
Electronic Speed Control: 60A
LiPo Battery: 3S or 4S 2100-4000mAh 25C
Battery Charger: Compatible with selected LiPo battery
Propeller: 13x6.5E if using 3S LiPo battery
13x4E if using 4S LiPo battery
LiPo charging bag, building and field equipment

SPECIFICATIONS

Wingspan: 63.5 in (1613 mm)
Length: 67.5 in (1715 mm)
Wing Area: 948 sq in (61.1 sq dm)
Wing Loading: 6.9-8.9 oz/sq ft (21-27 g/sq dm)
Weight: 46-59 oz (1304-1672 g)
Center of Gravity (CG): 3-3/4 - 5-1/2" (95 - 140mm) back from the
leading edge of the wing at the fuselage sides
Control Throws-
Low Rate High Rate
Elevator: 1-1/4" (32mm) 13 2-3/8" (60mm) 24
Rudder: 1-1/2" (38mm) 12 3" (76mm) 24
Ailerons: 3/4" (19mm) 9 1-1/2" (38mm) 18
3D Expo
Elevator: 4-1/2" (114mm) 50 45
Rudder: 7" (178mm) 60 40
Ailerons: 3-13/16" (97mm) 45 60

jxs 03/20/18
ir/jxs

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info