Kyosho 1/10 Monster Tracker Orange MT EP 2WD RTR

Tower Stock# LXGYET  •  Manufacturer Stock# 34403T2B
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Electric Powered, Radio Controlled, Readyset,
Ready to Run Monster 1/10 scale Tracker Truck in Orange from Kyosho.
Compatible with a wide range of optional parts for the Kyosho Sandmaster.

FEATURES

Chassis: Molded plastic, batttery pack accessible on bottom of
chassis
Drive: Rear wheel
Differential: Bevel gear type with flexible resin case
Radio: 2.4GHz Synchro KT-232P with dual rate steering and steering
and throttle trims
Motor: Brush equipped 22 turn 540 size
Electronic Speed Control: Team Orion, waterproof in normal operation
can be switched to operate on LiPo power by changing a jumper
Shocks: Coil over plastic body with preload adjusters, friction
(not oil-filled) parts including shock oil supplied to convert to
oil-filled shocks
Suspension: Double wishbone
Battery: Team ORION 1800mAh NiMH 6-cell stick pack with T-plug
connector
Battery Charger: AC wall type
Tires: All terrain rubber, 4.3" (110mm) diameter, 2.7" (70mm) wide
Wheels: Plastic, black in color
Steering: Servo saver equipped
Body: Trimmed and painted with orange and gray color scheme
Bumpers: Flexible plastic, black in color
Spur Gear: 91 tooth plastic
Pinion Gear: 21 tooth plastic
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind
vehicle

INCLUDES

Assembled Monster Tracker Truck with Motor, ESC, Radio System, NiMH
Battery, Wall Charger and Instruction Manual

REQUIREMENTS

AA Batteries: Four for transmitter
Track and maintenance equipment

SPECIFICATIONS

Vehicle;
Length: 16.1" (410mm)
Width: 11.8" (300mm)
Height: 6.9" (175mm)
Wheelbase: 10.6" (270mm)
Front and Rear Tread: 9" (230mm) distance from center of tires
measured side-to-side
Gear Ratio: 11.27:1
Weight: 4.2lbs (1900g) approximate with body
Body;
Length: 15.1" (384mm)
Width: 5.1" (131mm)
Height: 4.4" (111mm)

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 6x12x4mm Fr Hub Carriers 2 DTXC1569
4 6x12x4mm Rear Hub Carriers 2 DTXC1569
2 12x18x4mm Rear Gearbox 1 DTXC1597
4 5x8x2.5mm Rear Gearbox 2 DTXC1523

Size of steering bushings not supplied by manufacturer

jxs 10/02/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info