Kyosho 1/8 Mad Crusher VE EP-MT 4WD RTR

Tower Stock# LXGYEP  •  Manufacturer Stock# 34253B
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Shipping Restricted ItemDetails
Easy Pay
Request 3 Payments ($166.67, $166.66, $166.66) Details
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Brushless Electric Powered, Readyset
1/8 scale Ready to Run Kyosho Mad Crusher VE 1/8 scale Monster Truck.

FEATURES

Chassis: Two 0.098" (2.5mm) thick aluminum vertical plates
Drive: Four wheel chain drive, rigid axles with solid casing
Differentials: Steel spiral gears handle high power loads
Brushless Motor: Team Orion NEON 8BL 2100Kv, 0.196" (5mm) diameter
shaft
Electronic Speed Control: Team ORION Vortex R8
Radio: Kyosho Syncro KT-231P+ transmitter with throttle EPA and
steering dual rate adjustment dials, steering and throttle trim
and reverse, KR-331 receiver with fail safe
Steering Servo: Waterproof high-torque KS5031-09MW with metal gears
Shocks: Big Bore, oil-filled
Suspension: Five link with front and rear lateral rods for better
tracking and stability, ball joint upper and lower links
Body: Precut and painted 1970s pickup style with chrome plated
injection molded grill, bumper, wipers and mirrors
Tires: Rubber, block pattern width 2.7" (70mm), 5.9" (150mm)
diameter with foam inserts
Wheels: Plastic, matte black in color
Wheel Hubs: 17mm hexes, compatible with the Kyosho Inferno series
Pinion Gear: 16 tooth Mod1
Spur Gear: 42 tooth Mod1

INCLUDES

Mad Crusher Monster Truck, Radio System, Motor, ESC, Conversion
Connector for Battery, Painted and Trimmed Body, 1.5, 2.0, 2.5
and 3.0mm Hex Wrenches, Cross Wrench, 17mm Wheel Wrench, Wheelie
Bar with Rubber Wheel and Instruction Manual

REQUIREMENTS

AA Batteries: Four for transmitter
Batteries: Two 7.2V NiMH stick packs, or two 7.4V LiPos with T-plug
connectors (do not exceed 14.8V)
Battery Charger: Compatible with selected batteries
LiPo Charging Bag if using LiPo battery
Track and Maintenance Equipment

SPECIFICATIONS

Vehicle-
Length: 23.2" (590mm)
Width: 14.8" (376mm)
Height: 10.8" (275mm)
Wheelbase: 13.8" (351mm)
Ground Clearance: 2.0" (50mm)
Tread: 12" (306mm) distance from center of tires measured side-to
side
Weight: 10.4lbs (4700g) approximate
Battery Box Dimensions: 6.4 x 1.8 x 0.87" (162 x 46 x 22mm)
Body-
Length: 21.8" (555mm)
Width: 8.2" (209mm)
Height: 5.4" (137mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16x5mm Fr Diff 1 DTXC1585
2 8x16x5mm Rear Diff 1 DTXC1585
4 8x16x5mm Fr Axle 2 DTXC1585
4 8x16x5mm Rear Axle 2 DTXC1585
4 8x16x5mm Fr Uprights 2 DTXC1585
4 8x16x5mm Rear Uprights 2 DTXC1585
2 8x16x5mm Gearbox 1 DTXC1585
1 6x12x4mm Driveshaft 1 DTXC1569

jxs 09/28/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info