Associated 1/10 RC10B6 Team Buggy Kit Combo

Tower Stock# LXGXAS  •  Manufacturer Stock# 90011C
Associated 1/10 RC10B6 Team Buggy Kit Combo (large view)
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the 1/10 scale Electric Powered, Radio Controlled,
RC10B6 Team Buggy Kit Combo from Team Associated.

**This combo includes;**
#RT1508 Digital HV Hi-Torque Competition Steering Servo
#27005 Blackbox 510R Competition ESC w/PROgrammer 2
#262 Reedy Sonic 540-M3 Motor 6.5 Modified
#27307 Reedy Zappers LiPo 5800mAh 70C 7.6V Shorty Battery

The differences between the RC10B6 and RC10B6D are as follows;
The RC10B6 is configured for high to very-high traction surfaces.
The RC10B6D is configured for low to high traction surfaces.
RC10B6 RC10B6D
Laydown Transmission Upright Transmission
Gear Differential Ball Differential
Gull Wing Front Suspension Arms Flat Front Suspension Arms
Wide Front Shock Tower Narrow Front Shock Tower

FEATURES

Motor: Reedy Sonic 540-M3 6.5 modified, meets ROAR, EFRA, and
IFMAR specs, dual ball bearings, balanced high-strength sintered
rotor
Electronic Speed Control: Reedy Blackbox 510R with the PROgrammer 2
fully adjustable brake, throttle, power, and safety functions
PROgrammer 2 allows BEC voltage adjustment, temperature at which
ESC cuts motor power, and more
Steering Servo: RT1508 Digital HV hi-torque competition servo with
metal gears, ball bearings, coreless motor and 187.4 oz-in
(13.5 kg-cm) @ 6V, and 212.4 oz-in (15.3 kg-cm) @ 7.4V
LiPo Battery: #27307 Reedy Zappers 5800mAh shorty configuration
with 5mm Female Bullet Connectors and 2mm balance connector
Chassis: Hard anodized aluminum, 0.098" (2.5mm) thick pocketed
chassis, optional weights (not included) allow weight bias tuning,
repositioned A plate provides maximum front end clearance
Drive: Two wheel drive with heavy duty rear axle, aluminum front
axle and rear hexes for less rotating mass
Transmission: Stealth laydown 3-gear type offers lower CG and
reduced polar moment
Differential: Gear type for greater speed and forward acceleration
Suspension: Gull-wing front arms for lower CG and increased on-
power steering, updated ball cups and turnbuckles for precise
adjustment and durability
central positioning for optimum side-to-side balance
Shocks: V2 12mm Big Bore aluminum body with 3mm TiN coated shafts
and low friction X-rings for improved smoothness, Factory Team
aluminum shock bushings, rear shocks may be mounted on front or
rear of rear arms
Ball Bearings: Full set Factory Team upgraded
Steering: One-piece blocks with bolt-on Ackermann plate, Ackermann
refers to the effect of the inner front wheel rotating faster than
the outer front wheel during turns, reverse bell-crank steering
rack design offers more room for electronics
Body: Clear buggy, screw-mounted wing by JConcepts
Battery Hold-Down Strap: Adjustable to allow weight bias tuning

INCLUDES

RC10B6 Team Buggy Kit with Body, Rear Wing, Shocks, Decals,
Instruction Manual, Steering Servo, ESC, Motor and Battery

REQUIREMENTS

Radio: 2-channel
Battery Charger: Compatible with the Reedy Zappers LiPo battery
Wheels: 1/10 scale buggy
Tires: 1/10 scale buggy
Pinion Gear: 48P
Paint, building and track equipment

SPECIFICATIONS

Vehicle;
Length, Width and Weight will vary depending on equipment used
Wheelbase: 11-11.1" (280-282mm)
Body;
Length: 11.4" (289mm)
Width: 5" (127mm)
Height: 2.8" (71mm)

COMMENTS

For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Transmission 1 DTXC1595
4 5x10mm Transmission 2 DTXC1535
4 5x10mm Steering Blocks 2 DTXC1535
2 10x15mm Rear Hub 1 DTXC1595
2 6x13mm Rear Hub 1 DTXC1573
4 3x7mm Steering 2 DTXC1506

jxs 08/28/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info