Top Flite Giant F6F Hellcat 55-61cc Gas/EP ARF

Tower Stock# LXGUSR  •  Manufacturer Stock# TOPA0716
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES

Construction: Balsa and ply
Wing: Two-piece
aluminum wing tube, two LED wing tip lights
Covering: Top Flite MonoKote
Cowl: Painted fiberglass to match covering, dummy radial engne detail
Canopy: Clear plastic with painted-on frame lines
Fuel Tank:
Landing Gear: Retractable, designed for Robart pneumatic and electric
retracts
two --" (--mm) main wheels, 1-3/4" (44mm) tailwheel
Warranty: Top FliteŽ Models guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
modification. In no case shall Top Flite's liability exceed the
original cost of the purchased kit.

INCLUDES

Preassembled Wing, Tail and Fuselage components, Landing Gear, Fuel
Tank, two Aluminum Stabilizer Tubes, Tail and Wing Lights,

REQUIREMENTS

Radio: 7-channel minimum, 7-channel receiver for basic set up,
11-channel receiver for advanced set up, 13-channel receiver for
optional drop tank, and if lights will be controlled through
receiver
Servos: All control surfaces require metal gear servos w/at least
95 oz-in of torque (2-aileron, 2-flap, 2-elevator, 1-rudder,
1-tailwheel, 1 (40 oz-in)-throttle if using gasoline engine

Gasoline Power;
3.4 - 3.7 cu in (55 - 61cc) engine
Propeller: Compatible with selected engine

Electric Power;
Motor: Rimfire .65 (80-85-160) outrunner brushless recommended
ESC: 160A high voltage if using recommended motor
Battery: 12S (2x6S) 5000 - 5500mAh

SPECIFICATIONS

Wingspan: 86" (2184mm)
Wing Area: 1358 sq in (87.6 sq dm)
Weight: 24.7 - 27lb (11,222 - 12,247g)
Wing Loading: 42 - 46 oz/sq ft (128 - 140 g/sq dm)
Length: 66.3" (1683mm)
Center of Gravity, (CG): 6" (152mm) back from leading edge of top of
wing at joint between wing center section and outer wing panels
Control Throws: Low Rate High Rate
Elevator: 3/8" (9mm) 5° 5/8" (16mm) 9°
Rudder: 7/8" (22mm) 13° 1-1/4" (32mm) 19°
Ailerons: 3/4" (19mm) 13° 1' (25mm) 18°
Flaps 1-5/8" (41mm) 33° down

COMMENTS

Following are the Top Flite MonoKote colors used to cover this model
and order numbers for 6' rolls;
Flat White, TOPQ0504
Flat Insignia Blue, TOPQ0507
Flat Medium Blue, TOPQ0517

jxs 04/03/18

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info