ARRMA 1/10 GRANITE VOLTAGE MEGA Truck 2WD RTR Blue/Blck

Tower Stock# LXGTXUBL  •  Manufacturer Stock# ARAD10**
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Coupon discount not allowed by manufacturer for this product
Shipping Note:Details
Product WarningDetails
Money Saving Combos
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric Powered 1/10 Scale
Granite Voltage Mega SRS Monster Truck from Arrma.

FEATURES

Chassis: Molded plastic, split line monocoque style, gray in color,
incorporates front and rear shock towers, gearbox, motor mount and
upper suspension mounts, mid motor chassis design protects motor
from dirt and water
Drive: Rear wheel
Transmission: Molded composite gears
Differential: Ball bearing equipped, straight cut metal gears,
diff lubed with grease, manufacturer does not specify viscosity
Spur Gear: 48 pitch 93 tooth plastic
Pinion Gear: 48 pitch 16 tooth metal
Suspension: Double wishbone front and rear, adjustable ride height
Radio: Arrma ATX-101 with dual rate steering, throttle end points
throttle and steering trims
Steering Servo: ADS-5 waterproof case, 70oz/in (5kg-cm) of torque,
25T spline
Motor: Brush equipped, MEGA 20 turn, 540 size three motor mounting
positions to allow the use of three pinion sizes
Electronic Speed Control: 3-in-1 SRS combines ESC, receiver and
electronic control for the servo (standard 3-wire servo can also be
plugged into the unit if driver wants to use a different servo)
SRS unit is compatible with 2S LiPo, 2-6 cell Li-Ion, & 6-cell
NiMH batteries, battery types switchable with jumper, 2-stage low-
voltage cutoff for LiPo, Li-Ion, and single stage cutoff for
NiMH batteries
Shocks: Oil-filled at factory with 350cst mineral base shock oil,
equivalent to around 30wt shock oil from other manufacturers
Steering: Fixed links with servo saver
Battery: Two INR18650P button top Li-Ion cells, up to six Li-Ion
cells can be used for longer run times, for extra cells, order
ARAC2910
Battery Charger: 110V wall type
Battery Tray: Holds up to six Li-Ion 18650 cells, 2S LiPo pack or
6-cell NiMH stick pack, side loading design-battery is held in
place by pivoting door on chassis-no pins or clips to lose,
integrated T-plug provides connection to SRS unit when using
lithium ion cells, maximum battery dimensions are
5.55 x 1.89 x 1.02" (141 x 48 x 26mm)
Body: Trimmed and printed
Wheels: Seven spoke desert truck style wheels, black in color, 12mm
hex, nylon construction, bead diameter 2.81" (71.5mm)
Tires: dBoots Copperhead MT monster truck, width: 2.8" (71mm), outer
diameter 5.12" (130mm)
Caster: Non-adjustable caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: Two year limited warranty beginning at date of purchase

INCLUDES

Assembled Granite Voltage Mega SRS Monster Truck with Radio, 3-in-1
SRS Unit, Trimmed Body, Charger, Instruction Manual and two Li-Ion
Cells

REQUIREMENTS

AA Batteries: Four for transmitter
Track and maintenance equipment

SPECIFICATIONS

Vehicle;
Length: 16.5" (418mm)
Width: 13.4" (340mm)
Height: 7.4" (188mm)
Weight: 3.8lbs (1.75kg) with supplied battery
Wheelbase: 11.22" (285mm)
Ground Clearance: 1.61" (41mm)
Front and Rear Shock Spring Rate: 86gf/mm
Standard Final Gear Ratio: 15.11
Body;
Length: 15.9" (404mm)
Width: 5.5" (139mm) at front wheels, narrowest point
6.7" (170mm) at rear wheels, widest point
Height: 4.3" (110mm)

COMMENTS

Available in the following color schemes;
Blue and Black, ARAD10BL
Red and Black, ARAD10RL

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 6x11x4mm Fr Hubs 1 ARAC3210
2 5x10x4mm Fr Hubs 1 ARAC3200
2 6x11x4mm Rear Hubs 1 ARAC3210
2 5x10x4mm Rear Hubs 1 ARAC3200
2 6x11x4mm Diff & Idler Gear 1 ARAC3210
2 10x15x4mm Diff & Idler Gear 1 ARAC3202

jxs 08/31/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Industry Review #1
Industry Review #2
Industry Review #3
Industry Review #4
Industry Review #5
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info