Tamiya 1/10 Racing Fighter DT-03 Chrome Metallic Kit

Tower Stock# LXGNRB  •  Manufacturer Stock# 47347
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Easy Pay
Request 3 Payments ($51.67, $51.66, $51.66) Details
Notes from our tech department:
This is the Tamiya 1/10 scale, radio controlled, electric powered, 2WD
Racing Fighter Buggy Kit with Limited Edition Chrome Metallic Body Finish.


Chassis: DT-03 plastic monocoque, with increased angle for better
off-road potential
Drive: Rear wheel
Electronic Speed Control: Tamiya TBLE-02S, brushless compatible
Motor: Torque Tuned 540 brushed, longitudinally placed on chassis
Suspension: Four wheel double wishbone, front arms angled 25 for
great off-road driving
Differential: Bevel gear
Body: Molded polycarbonate with chrome metallic plating
Shocks: Plastic body oil-filled DT-03 CVA type
Wheels: Black plastic front, 0.75" (19mm) wide, 2.4" (60mm) diameter
rear, 1.4" (35mm) wide, 2.4" (60mm) diameter
Tires: Front, grooved 0.83" (21mm) wide, 3.1" (79mm) diameter
Rear, pin spike 1.5" (38mm) wide, 3.14" (80mm) diameter
Steering: Direct servo with tie rods
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the


Tamiya Racing Fighter Buggy with brushed motor, ESC, chrome metallic
plated polycarbonate plastic body, 17T pinion gear, tires, wheels,
oil-filled shocks, decal sheet, and instruction manual


Radio: 2-channel with high torque steering servo, NOTE; This model
requires a receiver with an external antenna cable as the signal
will be interfered with by the metal plated body. Radio systems
with external receiver antennas include the Futaba 3PV and 3PRKA.
Battery: 7.2V stick pack with standard connector
Battery Charger: To match selected battery
AA batteries, paint, building and track equipment


Wheelbase: 11.3" (287mm)
Front Tread: 8.7" (221mm)
Rear Tread: 8.2" (208mm) distance between center of tires measured
Length: 10.8" (276mm)
Width: 5.1" (130mm)
Height: 3" (76mm)


To Upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x11mm Gearbox 2 DTXC1547
2 5x11mm Front Axles 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547

jxs 04/04/17

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info