Axial 1/10 SCX10 II Trail Honcho 4WD w/LEDs RTR

Chassis: Scale steel C-channel side rails with adjustable body mount,
adjustable bumper mounts with swaybar mounting points, mounting
points for optional 2-speed and servo winch, adjustable chassis
mounted servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar
driveshafts, UVJ style front driveshafts for up to 45° of steering
angle, full ball bearing drivetrain
Transmission: AX10 three gear layout, metal motor plate, adjustable
ratio for high speed or competition level crawling speed
Slipper Clutch: Dual pad design for added surface area, 32P gear
pitch for high-torque applications
Motor: 35 turn, brush equipped, water resistant, integrated cooling
fan
Radio: Tactic TTX200 2-channel SLT radio with TR325 Receiver,
steering and throttle end point adjustment & reverse, pushbutton
steering and throttle trim
Steering Servo: Tactic TSX45 metal gear, water resistant, 151oz/in
(10.87kg/cm) torque rating, dual ball bearings
ESC: AE-5L waterproof, switchable between LiPo or NiMH
operation with a simple jumper, Star plug battery connector,
built-in LED light controller (NOTE LED leads are not compatible
with old Axial LED light strings, or third party LED light strings)
Spur Gear: 56T 32-pitch, plastic construction
Pinion Gear 15T 32-pitch, steel construction
LED Lights: Four white for head lights and turn signal markers, and
two red lights for tail lights
Battery Tray: Easy access front mount, accomodates batteries up to
5.75 x 1.2" (147 x 32mm) 3S, 5000mAh, with battery posts in
position dimensions are reduced to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized gear
ratio for reduced torque twist, optional gearing choices, one-
piece axle housing, increased clearance, larger load rated
bearings for durability, 8° kingpin axle eliminates tire scrub,
single piece axle housing, one-piece all metal locker, 10°
increment adjustments for knuckle carriers and straight axle
adapters, optimized gear ratio; 3.75 compared to 2.92 previously,
for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Method Hole, 1.02" (26mm) wide, 2.12" (53.9mm) tall,
12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, aggressively treaded Mud Terrain
tread with amazing traction on many surfaces, 4.7" (119.4mm) tall,
1.5" (38.1mm) wide
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with integrated mounts
upper and lower links, 4-link design reduces axle steer
and torque twist, and guards against suspension wrap-up in high-
power applications, composite links
Steering: Proper CMS geometry using 3-link setup with panhard bar,
45° steering angle
Warranty: One year bumper to bumper limited. Axial's warranty center
Hobby Services will repair or replace any incorrectly made part.
Proof of purchase is required for Axial to honor any warranty
claim. Axial reserves the right to change or modify this warranty
without notice. This warranty does not cover damages due to normal
wear and tear, users' failure to perform routine maintenance, user
error of assembly or installation, modifications, misuse, crash
damage, or the addition of aftermarket parts or optional parts.
Note: Purchasing products from unauthorized retailers may void the
warranty and prevent support and service.
Repair or replacement of the product by Hobby Services is the sole
and exclusive remedy for any loss or damages.

RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
Receiver Box, LED Lights 4 AA Batteries and Instruction Manual

Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Compatible with selected battery
Building and track equipment

Vehicle-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
12.0" (305mm) with optional link kits sold separately
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) approximately, with electronics
Optimized Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 40.44, stock
(33.69-54.15 with different spur/pinion gear combinations, extra
spur and pinion gears must be purchased separately)
Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

For Replacement Ball Bearings use:
Qty. Size Location Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion gear 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
1 5x11x4mm Spur Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Top Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535

jxs 12/13/17
ir/jxs