Multiplex Twin Star II Kit 56"

Tower Stock# LXFUUS  •  Manufacturer Stock# M214279
Multiplex Twin Star II Kit 56
Notes from our tech department:
This is the radio controlled, electric powered,
Multiplex Twin Star II Airplane Kit
For Intermediate Modeler/Fliers.


Construction: Elapor foam
Wings: Two-piece foam with GRP tubular wing joiner
Radio Compartment: Easily accessible under wing
Landing Gear: None, model is intended for hand launches and belly
Aileron Control: Dual Servo
Hardware: Control horns, rods and all mounting hardware included
Motor Mount: Wing mounted plastic motor brackets


Elapor foam fuselage and wing halves, pushrods, hardware package,
tail section, decals, photo-illustrated instructions


Electronic Speed Control: 17-27A
Motors: Two brushless PERMAX BL-O 2830-1100, Multiplex make a Power
Set #33 2619 that has the recommended motors, ESCs and propellers
(not carried)
Battery: 2S 2100-2500mAh LiPo
Charger: Timed or peak
Propellers: Two 9x6
Radio: 4-Channel
Servos: Four micro (2-ailerons, 1-elevator, 1-rudder)
Two Servo Extensions 12" (305mm): For aileron servos
Y-Harness: For aileron servos
Building and Field Equipment: Medium CA glue, activator, tools


Wingspan: 56" (1420mm)
Wing Area: 665 sq in (43 sq dm)
Weight: 53 oz (1500g)
Wing Loading: 11.5 oz/sq ft (35 g/sq dm)
Length: 43" (1085mm)
Airfoil: Semi-symmetrical, high wing
Center of Gravity: 3.3" (85mm) from the wing's leading edge at the
fuselage sides.
Control Throws-
Ailerons: Up +0.71" (+18mm) & Down -0.39" (-10mm)
Elevator: Up +0.94" (+24mm) & Down -0.59" (-15mm)
Rudder: Right & Left 0.79" (20mm) each side


This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the

jxs 12/10/15

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info