Hacker Model Edge 540 V2 EPP Foam ARF 1200mm Red 47.2"

Tower Stock# LXFNPE  •  Manufacturer Stock# HKPA1010
  • front/side (see larger view)
  • packaging (see larger view)
Notes from our tech department:
This is the Almost Ready to Fly Edge V2 1200mm in Red
from Hacker-Model.


Construction: CNC machined EPP (Expanded Polypropylene), repairable
with CA glue, CAD painting process for high degree of scale detail
Wing: One-piece
Aileron Control: Dual servo
Cowl: Molded plastic, red in color
Canopy: Clear plastic
Landing Gear:
with 2-1/8" (55mm) main foam wheels, 0.79" (20mm) tailwheel
Motor Mount: Plywood


ARF Edge V2 1200mm in Red with Canopy, Landing Gear, Wheels, Cowl
Carbon Struts, Carbon Pushrods, Hardware and Instructions


Radio: 4-ch with four micro servos
Motor: Outrunner brushless, IMPORTANT; if using other motors than
those recommended by Hacker, different holes must be drilled in the
firewall for proper installation
12" (305mm) Servo Extensions: Two
6" (152mm) Servo Extensions: Three
Electronic Speed Control: 40A
Propeller: 11x4.7 electric
LiPo Battery: 3S 1500-2500mAh, 20-25C discharge rate
Battery Charger: Compatible with selected battery
LiPo Charging Bag and Field equipment


Wingspan: 47.2" (1200mm)
Length: 47.6" (1210mm)
Flying Weight: 27.2oz (770g) approximate
Center of Gravity (CG): 3.7-4.1" (95-105mm) back from leading edge of
wing measured at point indicated on fuselage in manual
Control Throws-
Elevator, up & down: 50
Rudder, right & left: 45
Ailerons, up & down: 40

jxs 09/24/15

See Tower Catalog page 24.
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info