Phoenix Model 1/8 Spitfire Mk2 .46-.55 GP/EP ARF 55"

Tower Stock# LXEMWS  •  Manufacturer Stock# PH120
Phoenix Model 1/8 Spitfire Mk2 .46-.55 GP/EP ARF 55
Money Saving Combos
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Glow or Electric Powered, Radio Controlled, 1/8 scale
ARF Phoenix Models Spitfire Mk2.
For Intermediate Flyers


Construction: Built-up balsa and ply
Wing: One-piece with aluminum joiner tube
Covering: High quality heat shrink covering
Aileron Control: Dual servo
Cowl: Fiberglass, painted to match covering trim scheme
Motor Mount: Plywood
Engine Mount: Two-piece composite plastic
Landing Gear: Mechanical retracts with CNC machined metal suspension
struts, 2.5" (64mm) foam wheels
Spinner: Plastic construction, yellow in color 3.1" (80mm) diameter
Fuel Tank: 14oz (420cc) approximate


Phoenix Models Spitfire Mk2 with Landing Gear, Wheels, Fuel Tank,
Pushrods, Hardware and Instruction Manual


Radio: 6-ch minimum
Servos: 7 standard size, 2 aileron, 2 flap, 1 elevator, 1 rudder,
1 low profile type for retracts, 1-throttle (if using glow engine)
6" (152mm) Servo Extensions: Two
Y Harness: One
Receiver Battery: 4.8-6V NiMH (800-1200mAh)
For Glow Power;
Engine: 46-.55 2-stroke or .52 4-stroke
Propeller: Compatible with selected engine
Servo: Standard size for throttle
Glow fuel, glow starter
For Electric Power;
Motor: Brushless outrunner 1000-1400 W, 480 KV
Propeller: Compatible with selected motor
ESC: 50-80A
Battery: 4-6S LiPo, 4000-5500mAh
Battery Charger: For selected LiPo battery


Wingspan: 55" (1400mm)
Length: 48.8" (1240mm)
Flying Weight: 6.17-7.05 lbs (2800-3200 g)
Wing Area: 565 sq in (32.3 sq dm)
Wing Loading: 28.18oz sq ft (86g/sq dm)
Airfoil: NACA
Center of Gravity (CG): 3.5-3.7" (90-95mm) back from leading edge of
wing at the fuselage
Control Throws;
Low Rate High Rate
Aileron up/down: 0.39" (10mm) 10% expo 0.47" (12mm) 10% expo
Elevator up/down: 0.31" (8mm) 12% expo 0.39" (10mm) 12% expo
Rudder right/left: 0.79" (20mm) 15% expo 1.2" (30mm)15% expo
Flap: 0.59-0.79" (15-20mm down)


Epoxying the wings together is not a required step. However, doing so
will help prevent fuel residue from contacting the wood surfaces
in the wing panels. This is not a concern with an electric power
system installation.

If a replacement fuel tank is needed, the DuBro 14oz (DUBQ0214) fits
into the fuel tank area. Some modifications may be required to the
fuel tank area of the fuselage to ensure a perfect fit.

jxs 11/20/14
updt jxs 01/24/18

Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Industry Review #2
Manufacturer Mailing Address
Additional Manufacturer Contact Info