Multiplex FunCub RR 55"

Tower Stock# LXCEHY  •  Manufacturer Stock# M264243
Multiplex FunCub RR 55
Easy Pay
Request 3 Payments of $113.33 Details
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric Powered,
RR (Ready Built) Multiplex FunCub Trainer Airplane.
Requires Transmitter, Receiver, Battery and Charger
For Beginner Modeler/Fliers.


Construction: Elapor foam white in color
Wings: Two-piece all foam with plastic wing tube
Aileron Control: Dual servo
Flap Control: Dual servo
Motor: Himax C 3516-0840 brushless
Radio Compartment: Accessible under wing
Landing Gear: Main, prebent fixed wire 0.087" (2.2mm) diameter,
tailgear, prebent 0.039" (1mm) diameter wire
Wheels: Main, two Elapor foam 4.75" (120mm), foam 2" (51mm)
Canopy: Elapor foam, detaches easily for battery access
Decals: Peel and stick application with red and silver accents and
black and gray window detail


Pre-molded wings, fuselage and tail assemblies, pushrods, all
hardware, six servos, brushless motor, 13x4 propeller
(we recommend APCQ3078 as a replacement prop), pre-bent 0.039"
(1mm) wire landing gear, two 4.75" (120mm) main
main wheels, 2" (51mm) tailwheel, plastic motor mount, two
fiberglass wing spars, two decal sheets, photo-illustrated
instructions and tow hook.


Battery: 2100-2500mAh LiPo
Battery Connector Set: WSDM3001 if using battery listing in
Accessory Guide, connector from ESC will have to be replaced
Battery Charger: LiPo compatible with balancer
Radio: At least 6-channel
Misc. Items: Building and field equipment


Wingspan: 55.1" (1400mm)
Wing Area: 588 sq in (38 sq dm)
All Up Weight: 39.9oz (1130g)
Wing Loading: 9.8oz/sq in (30g/sq dm)
Length: 38.6" (980mm)
Airfoil: Flat bottom high-wing placement
Center of Gravity: 3.1" (80mm) Back from the wing's leading edge
at the fuselage
Control Throws-
Elevator: Up 0.59" (15mm), Down 0.47" (12mm)
Rudder: Right to Left 0.59" (15mm)


This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the

jxs 12/07/12

Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info