Hacker Model Edge 540 V3 Race ARF Pink 1000mm 39.4"

Tower Stock# HKPA0030  •  Manufacturer Stock# HC1702D
  • front/side (see larger view)
  • rear/side (see larger view)
  • bottom (see larger view)
  • packaging (see larger view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric Powered, Almost Ready to Fly
Hacker Edge 540-V3 Super Aerobatic Airplane.
For Experienced Pilots


Construction: EPP foam with fiber rod reinforcements in wing,
fuselage and ailerons
Wing: One-piece with side force generators
Aileron Control: Dual servo
Landing Gear: One piece carbon fiber with 1.8" (46mm) diameter foam
wheels, wooden landing gear plate
Wheel Pants: Two-piece EPP foam
Motor Mount: Plywood


Pretrimmed Wing, Fuselage and Tail Components, Wooden Motor Mount and
Landing Gear Plate, Landing Gear, Wheels, Reinforcement Rods,
Elevator and Rudder Pushrods and Instruction Manual


Radio: 4-channel with three micro servos weighing 9-15g
Motor: Outrunner brushless, IMPORTANT; if using other motors than
those recommended by Hacker, different holes must be drilled in the
firewall for proper installation
ESC: To match selected motor
Propeller: To match selected motor
Spinner: 0.98 - 1.2" (25-30mm) diameter
LiPo: 3S, at least 850mAh
Thin CA glue, activator, basic tools


Length: 39.4" (1005mm)
Airfoil: Symmetrical
Wingspan: 39.3" (1000mm)
Weight: 13.7oz (390g)
Control Throws- Basic Aerobatic Extreme
Elevator, up & down: 45mm 30% exp 60mm 40% exp 75mm 50% exp
Rudder, right & left: 70mm 30% exp 100mm 45% exp 125mm 60% exp
Ailerons, up & down: 45mm 30% exp 65mm 40% exp 80mm 45% exp
Center of Gravity (CG): 9.2-9.6" (235-245mm) back from front of

jxs 04/17/17

Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info