Castle Creations Mamba Micro X 12.6V ESC w/1406-2280kV

Tower Stock# CSEC6202  •  Manufacturer Stock# 010-0162-02
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:

FEATURES

CSEM4700, Castle Creations Mamba Micro X ESC
For 1/18 scale 2 or 4 wheel drive vehicles weighing up to
2.25lbs (1.02kg)
Heavy-duty BEC (battery eliminator circuit) handles high-draw
digital servos
Adjustable settings include;
Throttle Punch Control
Braking Curve Reverse Type
Drag Brake Motor Type
Auto LiPo Cutoff
Programmable Auxiliary Wire (AUX) allows adjustments to several
settings such as torque control and max throttle from a compatible
transmitter
Profiles can be custom designed on a PC with the Castle Link
PC programming software (software not included, can be
downloaded for free from Castle's website, voucher is included for
free Castle Link Programmer)

CSEC6900, 1406-2280Kv Brushless Sensored Motor
ROAR standard sensor port and labeled connections
SMARTSENSE uses sensors to provide smooth starts, excellent torque
and low speed driveability
CNC machined 6061-T6 aluminum can, slate gray in color
High performance 0.2mm steel lamination stacked stator
High strength 180C grade neodymium sintered magnets with Kevlar wrap
Oversize NMB grade ball bearings
Rebuildable

INCLUDES

Mamba Micro ESC
Motor Leads with 3.5mm Bullet Connectors
Pretinned Battery Leads
On/Off Switch
Receiver Connector
Instruction Booklet
1406-2280Kv Brushless Sensored Motor with Sensor Wire
Three 4mm Female Castle Bullet Connectors

REQUIREMENTS

LiPo battery, recommended battery capacity for 1/18 scale vehicles is
1500mAh, 30C or higher continuous discharge
Battery connector to match selected battery

SPECIFICATIONS

Mamba Micro X ESC
Input Voltage Range: Min. 2S LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Waterproof
Dimensions: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without connector

1406-2280Kv Brushless Sensored Motor.
Input Voltage Range: 2-4S LiPo
Kv Rating: 2280
Max RPM: 100.000
Can Length: 1.9" (49.5mm)
Can Diameter: 1.4" (36mm)
Weight: 6.9oz (197g) with wires
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Wire Lead: Castle 13 AWG silicone insulated wire
Connectors: 4mm male Castle Bullet Connectors

COMMENTS

Not intended for operation while submerged in liquid. If components
are operated in wet conditions, rinse with fresh water to remove
dirt or corrosives, then fully dry.

jxs 04/06/18
ir/jxs

Resources
Manufacturer Mailing Address
Additional Manufacturer Contact Info